I think I am done with load development for my three big bore handguns:
Freedom Arms .454 Casull, custom 10" octagon MagNaPorted barrel, with handloads of 240 gr. XTP Mags, 260 gr. FA JFP, 265 Swift A-Frames, 300 gr. FA JFP bullets.
Magnum Research BFR, .475 Linebaugh, 410 gr. Cast Performance bullets, at 1250 fps- handgun weight and grip make this load very manageable. Plans for taking this one back to Africa for large plains game- wife not crazy about taking on a Cape Buffalo, still working on it. In the meantime, back to TX for a Scimitar horned Oryx this fall.
Ruger Super Blackhawk, .480 Ruger, 410 gr. Cast Performance bullets. This is my off-road carry gun.
All three are very accurate, having taken game so far including coyotes, whitetails, red deer, hogs, and bison. The FA and BFR both wear Ultradot Gen 2 sights, 1" on the Casull, 30mm on the BFR.
Big-bore handguns are a serious affliction, making rifle looneyism seem like something sane, for me at least.
I'd rather be a free man in my grave, than living as a puppet or a slave....
Ive owned many variations of them all over the years. Love big bore handguns. Awesome collection you got there. A couple years ago i purchased a bfr in 500 jrh and have not bought anything else since. Absolutely fell in love with the caliber and havent looked back
Bighorn, that's a very nice trio you have there! I've used them as well & as you probably know those FA bullets are plenty hard, you wouldn't have any trouble poking a hole through a Cape Buffalo with any of those last 3 you mention. Good luck on the hunt, and take your wife with you! I used a 325 gr cast & got a pass through with my bisley 45.
I have a Freedom Arms 475 Linebaugh that I really enjoy. I took it on a Bison hunt in the Henry Mountains about 10 years ago. I never got close enough to feel confident of my shot. I was loaded with Buffalo Bore 420 gr LBT-LFN.
Turns out I had an a shot at a huge old bull, but the distance was 230 yards, so the 338 got the job done.
Still, I really wanted the Linebaugh to do the job..
Experience is a hard teacher because she gives the test first, the lesson afterwards.
Nice family of “big bores” you have there! And since finally getting one……I’ve learned to appreciate there usefulness much more! memtb
You should not use a rifle that will kill an animal when everything goes right; you should use one that will do the job when everything goes wrong." -Bob Hagel
“I’d like to be a good rifleman…..but, I prefer to be a good hunter”! memtb 2024
Recently I did a work up of some .45 Colt loads that were heavier than the all around loads of 270 grain at 900 FPS (from a 4&5/8ths" barrel).
I ended up finding the sweet spot with a 320 grain wide nose flat point at 1155. They shot extremely small groups and I saw no need to push them faster. I had made some loads that were quite a bit faster, but the groups were not nearly as good and saw no point, since it is not likely that they are going to perform any better in terms of terminal ballistics.
THE CHAIR IS AGAINST THE WALL.
The Tikka T3 in .308 Winchester is the Glock 19 of the rifle world.
That’s a great looking bullet. I doubt there’s much in NA, or the rest of the world for that matter, that will still want to fight after taking a good hit with that load.
Chronographs, bore scopes and pattern boards have broke a lot of hearts.
Doing the load development, I did not have much time to shoot the test loads one evening, as far as setup goes, so I was just shooting over the hood of my old Land Cruiser at 25 yards using my 4 & 5/8ths Blackhawk.
I could not see the shots or if I was on paper so I walked down to the target and all 4 were in one hole.
I took a pic because I figured I would screw up the next shot since that is typical for me.
I was aiming for the green dot BTW.
My fifth shot was pretty good too.
I then shot some for the chronograph and got an average of 1155 FPS, which for a short barrel (4&5/8ths") is pretty good. I am curious to see what numbers the load would do in a 7.5" Blackhawk.
This is definitely going to be a good heavy load for full size/large frame .45 Blackhawks.
THE CHAIR IS AGAINST THE WALL.
The Tikka T3 in .308 Winchester is the Glock 19 of the rifle world.
I think that was pretty much where John Linebaugh determined was the ultimate for the 45 LC! That’s one sweet look’n cartridge! memtb
Last edited by memtb; 04/24/23.
You should not use a rifle that will kill an animal when everything goes right; you should use one that will do the job when everything goes wrong." -Bob Hagel
“I’d like to be a good rifleman…..but, I prefer to be a good hunter”! memtb 2024
Doing the load development, I did not have much time to shoot the test loads one evening, as far as setup goes, so I was just shooting over the hood of my old Land Cruiser at 25 yards using my 4 & 5/8ths Blackhawk.
I could not see the shots or if I was on paper so I walked down to the target and all 4 were in one hole.
I took a pic because I figured I would screw up the next shot since that is typical for me.
I was aiming for the green dot BTW.
My fifth shot was pretty good too.
I then shot some for the chronograph and got an average of 1155 FPS, which for a short barrel (4&5/8ths") is pretty good. I am curious to see what numbers the load would do in a 7.5" Blackhawk.
This is definitely going to be a good heavy load for full size/large frame .45 Blackhawks.
I'll take 200 of those 45's
I got banned on another web site for a debate that happened on this site. That's a first