The new to me pre64 model featherweight in 270 I just bought looks like it needs a shim in order to make the floorplate work. Well not exactly true it will work if I loosen the front screw a little but thinking for accuracy II need it tightened all the way down which would require a shim.
Do you guys buy them or make them and what have you had success using??
Would the shim go between the stock and floor plate mount? If so, I would use a thin washer and you should be able to tighten down.....I go 40# on my pre 64 Model 70's. Darrel
I’ve seen enough shims on pre-64 plates that are identical and I feel are factory parts. I’ll post pics in the Image Gallery in a bit. As previously stated they are just thin washers.
"When the going gets weird, the weird turn pro." Hunter S. Thompson
I have seen them also but have no idea where to find one. I didn’t see them at pre64win.com. They look almost identical to the front tab on the floorplate.
I have seen them also but have no idea where to find one. I didn’t see them at pre64win.com. They look almost identical to the front tab on the floorplate.
They’re the ones, just washers that one never sees until the gun is taken apart.
"When the going gets weird, the weird turn pro." Hunter S. Thompson