Home Forums Hunting & Shooting Gunsmithing Recoil spring for Para 9mm (discontinued)

Anyone have a source for a recoil spring for a Para Ordnance PDA 9mm? I can't find the part or accurate specs on it so I could maybe find a suitable replacement. The gun has started stovepiping with some ammo and failing to return to battery with others.

Wolff:

https://www.gunsprings.com/

Thanks for the recommendation, but they told me they didn’t have anything to fit it.

Thanks for the link. The sizes there don't seem to fit - looks like these may be for full length rods and the PDA uses a 2 stage spring. The primary spring on this gun is about 2" uncompressed and the secondary about an inch when captive on the guide rod.

https://pistolwizard.com/guides/recoil-spring down towards the bottom there's info on repurposing springs from other manufacturers or ordering custom springs.

Thanks! This looks like it may be what I end up doing. Appreciate the link.

For anyone that finds this thread later, the guys at ISMI pointed me to this conversion kit made by Evolution:
Conversion Kit