|
Joined: Apr 2006
Posts: 3,353 Likes: 14
Campfire Tracker
|
OP
Campfire Tracker
Joined: Apr 2006
Posts: 3,353 Likes: 14 |
Several years ago the stock cracked on my Hawkeye .358 because I didn't know the torque spec for the front action screw is 95 in lbs, and I only tightened it to about 60. The factory stock split like kindling! I got a piece of T grade English walnut from Roger Vardy in Austrailia and had a guy do a 95% action inlet and basic profile. Then I went to work on it. I've always liked the looks of those old Rigby stalking rifles with the short forends so I decided to Rigbyize this Ruger. I fitted a modified NECG banded front sight that I trimmed up and stippled, as well as a NECG banded sling swivel and a rear stud from Ullman Precision. I also filed off the cheesy engraving from the floorplate and reblued the part to match the new hardware. The forend tip and crossbolt plugs are ebony, and the stock is finished with a homemade alkanet root stain and Sutherland Welles tung oil. A VXII 1-4 sits in Alaskan Arms QD rings, so I can switch back and forth with a XS peep sight as desired. This winter after deer season's over I'll figure out checkering and finish this rifle off. We drew first blood yesterday when this 3 point caught me emerging into a small muskeg and took off at a trot. As he didn't seem horribly disturbed, I followed after him, grunting as I went. When I came to the next opening about 40 yards away I found him facing me with his ears back and hackles up, ready to fight. He looked at me as if to say "Oh crap, it's you again!" and took off. I commenced with four rounds rapid. In one of my less stellar bits of shooting I achieved only one hit, but it was enough; taking him through the body at a hard quartering angle and and blowing out the throat. I love the rut and 250gr Noslers at 2375! Thanks to JB and his ballistic achievements showing what TAC will do in a .358, and to others here who've shown their projects over the years-very inspirational.
|
|
|
|
Joined: Jun 2004
Posts: 3,694
Campfire Tracker
|
Campfire Tracker
Joined: Jun 2004
Posts: 3,694 |
What a beautiful rifle - well done š Some modest checkering would be nice to complete the look......
BT53 "Where do they find young men like this?" Reporter Savidge, Iraq Elk, it's what's for dinner....
|
|
|
|
Joined: May 2004
Posts: 2,676
Campfire Regular
|
Campfire Regular
Joined: May 2004
Posts: 2,676 |
Nice looking rifle for sure!
|
|
|
|
Joined: Jun 2004
Posts: 44,893 Likes: 12
Campfire 'Bwana
|
Campfire 'Bwana
Joined: Jun 2004
Posts: 44,893 Likes: 12 |
We drew first blood yesterday when this 3 point caught me emerging into a small muskeg and took off at a trot. As he didn't seem horribly disturbed, I followed after him, grunting as I went. When I came to the next opening about 40 yards away I found him facing me with his ears back and hackles up, ready to fight. He looked at me as if to say "Oh crap, it's you again!" and took off. I commenced with four rounds rapid. In one of my less stellar bits of shooting I achieved only one hit, but it was enough; taking him through the body at a hard quartering angle and and blowing out the throat. I love the rut and 250gr Noslers at 2375!
Thanks to JB and his ballistic achievements showing what TAC will do in a .358, and to others here who've shown their projects over the years-very inspirational. I believe the technical term for that is whomp.
|
|
|
|
Joined: Mar 2006
Posts: 3,791 Likes: 1
Campfire Tracker
|
Campfire Tracker
Joined: Mar 2006
Posts: 3,791 Likes: 1 |
Please do an intervention for stick. Beautiful rifle. Amazing job. No other words required.
|
|
|
|
Joined: Apr 2011
Posts: 4,768 Likes: 15
Campfire Tracker
|
Campfire Tracker
Joined: Apr 2011
Posts: 4,768 Likes: 15 |
The way life should be.
|
|
|
|
Joined: Apr 2011
Posts: 15,360 Likes: 10
Campfire Ranger
|
Campfire Ranger
Joined: Apr 2011
Posts: 15,360 Likes: 10 |
Awesome hunt and great work on the rifle!
Semper Fi
|
|
|
|
Joined: Dec 2010
Posts: 1,629 Likes: 13
Campfire Regular
|
Campfire Regular
Joined: Dec 2010
Posts: 1,629 Likes: 13 |
Good grief you run alot of nice rifles down there. Congrats on the deer. The mild recoil of the 358, you can rattle off some rapid snap shots. Any other planned hunts with the .358?
75% of the power of a 9.3x62 with 50% less powder. If that ain't magic, I don't know what the heck is. I saw no difference in killing power between the 2 cartridges. But you can surely feel the difference in weight when carrying the 358 all day.
|
|
|
|
Joined: Sep 2004
Posts: 8,207
Campfire Outfitter
|
Campfire Outfitter
Joined: Sep 2004
Posts: 8,207 |
Nice job on the first buck of the season Bucktail. I was out yesterday too - it was a glorious day, but no deer were seen or harmed by me. Heard a guy fire 3 salvos, totaling 7 shots about 1/4 - 1/2 mile from me. I've shot a lot of nice bucks with the .338" x 250 gr NPT out of my retired .338 Win. Using the .358" x 250 NPT out of my Whelen nowadays. Those heavy-for-caliber NPTs at modest velocities just work.
|
|
|
|
Joined: Apr 2006
Posts: 3,353 Likes: 14
Campfire Tracker
|
OP
Campfire Tracker
Joined: Apr 2006
Posts: 3,353 Likes: 14 |
Thanks guys.
Mainer you ask about plans? Just to kill more deer, although if I run into the right brown bear I won't hesitate to sort him with this rifle.
I really like medium bores as they provide alot of versatility for my hunting: A 250-300 grain bullet at typical medium bore velocities will work for defensive brown bear shooting, while being useful on the rare 250 yard shot I get. As illustrated yesterday, they also work very, very well on odd angle shots.
|
|
|
|
Joined: Oct 2004
Posts: 26,657 Likes: 21
Campfire Ranger
|
Campfire Ranger
Joined: Oct 2004
Posts: 26,657 Likes: 21 |
That is a sweet looking rifle.
|
|
|
|
Joined: Dec 2020
Posts: 165
Campfire Member
|
Campfire Member
Joined: Dec 2020
Posts: 165 |
Awesome job on the stock. I have a stainless Hawkeye in 358, that I need to replace the stock. Itās a great caliber.
|
|
|
|
Joined: Feb 2013
Posts: 4,388 Likes: 1
Campfire Tracker
|
Campfire Tracker
Joined: Feb 2013
Posts: 4,388 Likes: 1 |
I have a hawkeye thats probably only torqued to 65 lbs which is as high as my fat boy wrench will measure.
How should i go about accurately increasing the torque to recommended level?
|
|
|
|
Joined: May 2009
Posts: 17,289 Likes: 5
Campfire Ranger
|
Campfire Ranger
Joined: May 2009
Posts: 17,289 Likes: 5 |
95 inch/lbs sounds ridiculous.
Very nice rifle.
|
|
|
|
Joined: Apr 2006
Posts: 3,353 Likes: 14
Campfire Tracker
|
OP
Campfire Tracker
Joined: Apr 2006
Posts: 3,353 Likes: 14 |
SCgman1, I think you'll have to buy or borrow a new torque wrench. I use a Tekton: https://www.amazon.com/TEKTON-TRQ21...p;hvtargid=pla-4583451676644531&th=1I think it also depends on what your rifle is chambered for. My .358 stock split when I went to check zero after taking it apart for my post-season cleaning of the deer rifles where I have to remove all the moss and hemlock needles. My son bought a 77 locally that had been rebarreled from .338 to .416 Taylor, with a laminated Ruger stock. The stock split within the first three rounds he fired with his new rifle. Come to find out the guy he bought it from had switched out the stocks before selling it and hadn't torqued it properly. That rifle now sits in a factory plastic stock, properly torqued, with no issues. On the other hand, my Ruger 77 6mm SPC I found that it wouldn't shoot very well in the factory plastic stock until I torqued the front screw to 60 in lbs and the rear to 25. Which is to say on a light kicker or maybe with the plastic stock you have some leeway, but with any cartridge producing decent recoil torque specs are definitely a thing to watch out for.
|
|
|
|
Joined: Jan 2006
Posts: 665
Campfire Regular
|
Campfire Regular
Joined: Jan 2006
Posts: 665 |
Heck Yeah!!! A+ job all around... Well Done, Congrats and thanks for sharing!!!
|
|
|
|
Joined: Oct 2005
Posts: 1,801
Campfire Regular
|
Campfire Regular
Joined: Oct 2005
Posts: 1,801 |
PAB:
Awesome focus and effort. Paid off bigly, it seems!
Carry what youāre willing to fight with - Mackay Sagebrush
Perfect is the enemy of good enough
|
|
|
|
Joined: Feb 2013
Posts: 4,388 Likes: 1
Campfire Tracker
|
Campfire Tracker
Joined: Feb 2013
Posts: 4,388 Likes: 1 |
SCgman1, I think you'll have to buy or borrow a new torque wrench. I use a Tekton: https://www.amazon.com/TEKTON-TRQ21...p;hvtargid=pla-4583451676644531&th=1I think it also depends on what your rifle is chambered for. My .358 stock split when I went to check zero after taking it apart for my post-season cleaning of the deer rifles where I have to remove all the moss and hemlock needles. My son bought a 77 locally that had been rebarreled from .338 to .416 Taylor, with a laminated Ruger stock. The stock split within the first three rounds he fired with his new rifle. Come to find out the guy he bought it from had switched out the stocks before selling it and hadn't torqued it properly. That rifle now sits in a factory plastic stock, properly torqued, with no issues. On the other hand, my Ruger 77 6mm SPC I found that it wouldn't shoot very well in the factory plastic stock until I torqued the front screw to 60 in lbs and the rear to 25. Which is to say on a light kicker or maybe with the plastic stock you have some leeway, but with any cartridge producing decent recoil torque specs are definitely a thing to watch out for. Mines a 30-06.
|
|
|
|
Joined: Apr 2006
Posts: 3,353 Likes: 14
Campfire Tracker
|
OP
Campfire Tracker
Joined: Apr 2006
Posts: 3,353 Likes: 14 |
With an ā06 Iād be sure to have it torqued properly.
|
|
|
|
Joined: Nov 2004
Posts: 10,065 Likes: 9
Campfire Outfitter
|
Campfire Outfitter
Joined: Nov 2004
Posts: 10,065 Likes: 9 |
Nice set up. What's your Tac load with 250's? I just necked up some 308 brass to load some rounds for my BLR 358. I got some Tac out and some 250g speer hot cors then came upstairs to get my phone so I could find a good start and range. I'm hoping to get to 2300 with the 250's. Mostly shooting 200g cast pcgc bullets at slower speeds but want a good hotter load on hand.
Bb
|
|
|
|
524 members (17CalFan, 1234, 1_deuce, 1936M71, 10gaugeman, 12344mag, 51 invisible),
1,762
guests, and
1,119
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
Forums81
Topics1,194,105
Posts18,522,468
Members74,026
|
Most Online11,491 Jul 7th, 2023
|
|
|
|