Home Forums Hunting & Shooting Hunting Rifles Hunting Stock Help

I am putting together a new rifle. I am trying to decide on a stock. I have used HS precision stocks for quite sometime and have been very happy with them. I have a couple on Model 70’s.

I like the feel of the HS but I have never felt the McMillans. I had a Bell Carlson but in my opinion they felt to ‘slick’ and preferred the HS tackiness.

How does the McMillans feel as compared to the HS? Has anyone had a side by side comparison?

Thanks in advance!

I realize not all stocks are created equal, the finishes between my HS Precision and Mcmillans are pretty similar. I'm talking about the surface/texture. This does not include the swirly stocks though, those are slick IMHO. I am in agreement about the B&C stocks feeling a little more slick, as compared to the HS or Mcmillan. Especially the B&C stock they use on the Extreme weather BACO. Good luck with your search.

There is no comparison. They are made completely different and that is why a McMillan will cost twice as much.

B&C and HS both use an aluminum chassis in the center. Melted plastic mixed with chopped fiberglass is poured into a mold with the chassis in the center to form the stocks. The aluminum in the center gives the stock it's strength, but results in a heavier, thicker stock.


McMillan, Brown Precision, and all of the other higher end stocks start by laminating layers of fiberglass cloth to form the heart of the stock instead of using the aluminum chassis. The lighter weight Edge stocks use kevlar cloth instead of fiberglass. The Kevlar reduces stock weight by about 1/2 lb and is stiffer than fiberglass. It also adds to the cost.

The outside is made from several layers of either fiberglass of kevlar cloth which are left hollow in the butt area and the forend ahead of where the front action screw is. The hollow areas are filled with lightweight expanding foam to deaden sound.

The cutout for the action is milled the same way you'd do it with a wood stock. It is a lot more expensive to make, but you get a very strong stock, but one that can be trim and light.

I like the B&C stocks on a heavier rifle that will be used as a target/varmint rifle or shot mostly at the range. They are just heavier and thicker than I want on most of my hunting rifles. It is worth the added costs to get a trimmer. lighter stock on most of my hunting rifles.

HS offers more options for some rifles that are not available from B&C, but if B&C makes a stock for the rifle I'd just as soon have it as HS. They are virtually the same and B&C is usually a lot cheaper. It is easy enough to repaint a stock with a textured paint if you don't like the"feel".

Check out AG composites I currently have 2 on my LR hunting rifles and have handled close to a dozen there great stocks.

i would reach out to outkast arms ...they have a stock installed for 750.00

Excellent detailed explanation JMR40!!!

I’ve yet to see a “slick” McMillan but only have 60+ and nothing older than M40A1 smears,with more than a “few” patterns covered. Hint.

HS is fhuqking Dog Schit in comparison,as is B&C. I’ve a herd of AG’s in both OEM and Custom and they are Skookum. Hint.

GB Terrains,Outlanders and Renegades are solid choices. I’ve a few dozen. Hint………..

I have a few McMillan stocks on my M70 rifles, my favorite is the old Winchester FWT pattern they discontinued. I have a couple Compacts and they're just okay, I have a Winlite stock that needs a home one of these days. I've had a B&C stock on my Extreme Weather rifle, and it was just to fat and I didn't enjoy the rifle.

I do have a Wildcat composite stock being imported from Canada. My buddy told me he was submitting the forms to import one, and I asked if I could get him to add me. So I have the their FWT pattern stock coming for my .270 WSM.

Another stock I want to try is a Bansner. I have a couple of the Howa Alpine stocks he designed and I really like them. I also purchased a Mini Mauser wearing one years ago, that rifle just doesn't get used much.

The actual finish of a stock (textured, slick, etc) is easily altered. I’d focus on the dimensions, pattern, etc and how that feels. HS stocks may be better than factory synthetics but they feel like a chunky 2x4 compared to better stuff. McMillian, Manners, AG Composites, Stockys, etc.

.
Take a look at the Grayboe stocks.
https://www.grayboe.com/

Start with an action type and barrel contour that you can find a stock for.
That would be the first thing I'd do.

He is looking for Winchester stocks.

JMR40- Thank you for the education on some of these manufacturing processes. I have a couple of B&C’s I should put in the classifieds. M70 LA and SA…

So if I understand correctly McMillan does not use any aluminum chassis in the center like the HS and B&C. Hence the weight savings. I will take a look at McMillan and some of the others mentioned.

I should have clarified in my opening post that I will be putting a Proof Research carbon (sendero) on a Lone Peak action. The challenging part is not being able to do a side by side comparison locally on the stocks here in the Seattle area before I make a decision and order one.

Appreciate the knowledge of the forums here…

Fhuqk Proof,go steel with a real barrel and McMillan. Hint……….

I got a Bansner for one of my M70s. Proportions and feel is nice, but it’s still unfinished and I haven’t shot it in the new stock. It had a B&C before that and there is no comparison as far as feel and weight.

That sure opens up the possibilities then. Sky is the limit for 700s and clones. Apologies to DD.

Wish Grayboe would inlet for Tikka's. They'd make a $$$ killing $$$

Not into the paddle look of the Grayboes to get them lighter and there right on par as far as price as the AG.
To each his own I guess

I’ve never seen an Outlander,Terrain or Renegade “paddle”. Though in fairness,those who don’t actually shoot,DREAM all sorts of fhuqking schit up. Hint…………..

Read my post sticky, there paddle stocks are the only ones to equal weight of the AG privateer. 24oz i made it easy for ya.
The three you mention are 32oz, 4oz and 3.75 lb boat anchor
Those who don't shoot dream [bleep] up. HINT...

“Their” is too big of a word for you and Imitation is THE most Sincere form of Flattery. Hint………

Resorting to being a grammar cop, so sad.

+1

SD

Your Bumbling Dumbfhuqktitude is anything but a "SURPRISE!",to anyone else but you. I'm simply the guy who shoots it all and then some and you are the gal who pretends aloud with her GoogleFu. Hint.

In no fhuqking particular order. Hint.











Pardon wares that actually exist. Hint.

Fhuqking LAUGHING!.....................

No kidding. Coming from the one who makes a drunk, stoned, crosseyed creole look like a spelling bee champion

Ladies,

Be sure to keep filling out your Professional Victim Status Hurt Feeler Reports,while extolling that besides being CLUELESS Crying Kchunts,that you just also "happen" to be Lying Pieces Of Fhuqking Schit...you "lucky" kchunts. Hint. Congratulations?!?



Bless your hearts,for Pretending aloud.

Hint.

Fhuqking LAUGHING!....................

How often does this do nothing think of everyone here, with endless files of cut and paste. A whole hell of a lot more said than done. HINT. LOL

Proof is in the pudding. He's swimming in pudding. HINT. Read it again. HINT


haahahahahhahahahahahhahahahahahahahahahahahahahahahahahahahahhaha

Watch it with the eye jokes LOL

AG Composites just announced they will be making a new fiberglass stock. Production will start in about 4 weeks.

Whatever it comes with. Just need something to hold on to.

I've only had two Outlanders but I agree. They're on the third generation of them now. It and the first generation are a bit heavier than the second but all are excellent stocks. They run sales with significant discounts around major holidays. And yes, they definitely need to inlet their stocks for Tikka actions.

Also have a Bansner on a Model 70. I'm not sure that the proportions are right for me, but it's a superb piece of gear and I killed a bear with it a couple of years back.


Okie John

I’ve owned both hs and McMillan, both worked well for me. That said, I believe McMillan has priced themselves out of the market for the average hunter. Hs gets the nod for me.