|
|
Joined: Feb 2001
Posts: 8,532
Campfire Outfitter
|
OP
Campfire Outfitter
Joined: Feb 2001
Posts: 8,532 |
I know this was discussed recintly.. Can't find the thread.. Need to know what Leupold rings to fit on a 22 dovetail. Want something with 4 lock-down screws per mount.....Thanks! Virgil B.
|
|
|
|
Joined: Aug 2001
Posts: 240
Campfire Member
|
Campfire Member
Joined: Aug 2001
Posts: 240 |
According to my new Leupold catalog they now have only the one screw per side BUT with the Torx screws for the grooved 22rf rings...the Mark IV have two per side but are for cross slot/Weaver style bases.....I have used some of the one screw -Torx rings and they hold well and the Torx screw can be tighten too tight and not deform.....use only the short arm of the torx wrench to finger tighten and they hold fine......HTH...good luck and good shooting!!
|
|
|
|
Joined: Feb 2001
Posts: 8,532
Campfire Outfitter
|
OP
Campfire Outfitter
Joined: Feb 2001
Posts: 8,532 |
|
|
|
|
Joined: Feb 2001
Posts: 8,532
Campfire Outfitter
|
OP
Campfire Outfitter
Joined: Feb 2001
Posts: 8,532 |
Ended up getting Burris steel rings for the Weaver base that came with my "little favorite" Only problem is that the #%!!!! thing didn't come drilled & tapped! Base plate & screws with no holes to put them in! Virgil B.
|
|
|
|
625 members (160user, 12344mag, 10Glocks, 10gaugemag, 10ring1, 007FJ, 64 invisible),
2,490
guests, and
1,329
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
Forums81
Topics1,192,203
Posts18,485,345
Members73,966
|
Most Online11,491 Jul 7th, 2023
|
|
|
|
|