|
|
Joined: Mar 2018
Posts: 36
Campfire Greenhorn
|
OP
Campfire Greenhorn
Joined: Mar 2018
Posts: 36 |
Could you tell any difference, round vs flat stop plates?
DF I didnt test them side by side but on the second test with the lighter springs, the primers had less of a scoop.
|
|
|
|
Joined: Nov 2010
Posts: 37,211 Likes: 9
Campfire 'Bwana
|
Campfire 'Bwana
Joined: Nov 2010
Posts: 37,211 Likes: 9 |
That gun have a titanium firing pin?
DF
|
|
|
|
Joined: Mar 2018
Posts: 36
Campfire Greenhorn
|
OP
Campfire Greenhorn
Joined: Mar 2018
Posts: 36 |
That gun have a titanium firing pin?
DF I dont know what it is? The new one will be in this evening, I'll weigh them and maybe see a big difference
|
|
|
|
Joined: Nov 2008
Posts: 8,702 Likes: 2
Campfire Outfitter
|
Campfire Outfitter
Joined: Nov 2008
Posts: 8,702 Likes: 2 |
That gun have a titanium firing pin?
DF I dont know what it is? The new one will be in this evening, I'll weigh them and maybe see a big difference https://www.ruger.com/products/sr1911CommanderStyle/models.htmlSkeletonized hammer and titanium firing pin for faster lock time.
Swifty
|
|
|
|
Joined: Mar 2018
Posts: 36
Campfire Greenhorn
|
OP
Campfire Greenhorn
Joined: Mar 2018
Posts: 36 |
Right away I noticed the new pin is shorter, I didnt measure it.
|
|
|
|
Joined: Mar 2018
Posts: 36
Campfire Greenhorn
|
OP
Campfire Greenhorn
Joined: Mar 2018
Posts: 36 |
The new pin and spring worked perfectly!! The old pin is about 3/16" longer than the new one, I think I may trim some off and try it again to see what happens
Now on a few rounds the slide will not go into battery, stops about 1/4" or so short and take some pushing to get it to go. Sometimes I remove the mag put the round back in and rack the slide, this works fine on the round that just jammed up. It does this with all magazines. I'm thinking something needs to be polished? Anyone have ideas??
|
|
|
|
Joined: Nov 2008
Posts: 8,702 Likes: 2
Campfire Outfitter
|
Campfire Outfitter
Joined: Nov 2008
Posts: 8,702 Likes: 2 |
The new pin and spring worked perfectly!! The old pin is about 3/16" longer than the new one, I think I may trim some off and try it again to see what happens
Now on a few rounds the slide will not go into battery, stops about 1/4" or so short and take some pushing to get it to go. Sometimes I remove the mag put the round back in and rack the slide, this works fine on the round that just jammed up. It does this with all magazines. I'm thinking something needs to be polished? Anyone have ideas?? Go back to the standard recoil spring.
Swifty
|
|
|
|
Joined: Mar 2018
Posts: 36
Campfire Greenhorn
|
OP
Campfire Greenhorn
Joined: Mar 2018
Posts: 36 |
The new pin and spring worked perfectly!! The old pin is about 3/16" longer than the new one, I think I may trim some off and try it again to see what happens
Now on a few rounds the slide will not go into battery, stops about 1/4" or so short and take some pushing to get it to go. Sometimes I remove the mag put the round back in and rack the slide, this works fine on the round that just jammed up. It does this with all magazines. I'm thinking something needs to be polished? Anyone have ideas?? Go back to the standard recoil spring. I tried 5 springs plus the original, the original was the worst performance with the most jams.
|
|
|
|
Joined: Mar 2018
Posts: 36
Campfire Greenhorn
|
OP
Campfire Greenhorn
Joined: Mar 2018
Posts: 36 |
No advice for the feeding issues?
|
|
|
|
464 members (10gaugeman, 1beaver_shooter, 10gaugemag, 007FJ, 12344mag, 06hunter59, 56 invisible),
2,594
guests, and
1,187
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
Forums81
Topics1,193,644
Posts18,512,513
Members74,010
|
Most Online11,491 Jul 7th, 2023
|
|
|
|
|