|
|
Joined: Feb 2002
Posts: 195
Campfire Member
|
OP
Campfire Member
Joined: Feb 2002
Posts: 195 |
Some one please explain to me how the shroud is removed once the pin and assembly is out of the bolt. I assume there is a pin between the cocking piece and firing pin? Little help?
Growler
|
|
|
|
Joined: Nov 2000
Posts: 2,509
Campfire Regular
|
Campfire Regular
Joined: Nov 2000
Posts: 2,509 |
You have to compress the firing pin spring until the cocking piece protrudes out the rear of the shroud exposing the pin.Drive it out and remove cocking piece and remove the shroud. I have a tool I made a few years ago, a 4" long piece of 1/2" pipe with a 1/2" UNC nut welded on each end.A piece of 1/2" UNC threaded rod with hole drilled in the end to go over the business end of the firing pin and a T handle welded on the other end.Easy to make and it works great.
"after the bullet leaves the barrel it doesn't care what headstamp was on the case" "The 221 Fireball is what the Hornet could have been had it stayed in school"
|
|
|
|
Joined: Feb 2002
Posts: 195
Campfire Member
|
OP
Campfire Member
Joined: Feb 2002
Posts: 195 |
Thanks Rick I'll have to put a tool together.
Growler
|
|
|
|
Joined: Nov 2000
Posts: 2,509
Campfire Regular
|
Campfire Regular
Joined: Nov 2000
Posts: 2,509 |
I just took a pic of mine that I can send you.
Pic is on the way.
Last edited by rembo; 03/26/04.
"after the bullet leaves the barrel it doesn't care what headstamp was on the case" "The 221 Fireball is what the Hornet could have been had it stayed in school"
|
|
|
|
Joined: Feb 2002
Posts: 195
Campfire Member
|
OP
Campfire Member
Joined: Feb 2002
Posts: 195 |
|
|
|
|
563 members (12344mag, 007FJ, 06hunter59, 10gaugeman, 10gaugemag, 163bc, 53 invisible),
2,942
guests, and
1,228
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
Forums81
Topics1,193,970
Posts18,519,688
Members74,020
|
Most Online11,491 Jul 7th, 2023
|
|
|
|
|