Home Forums Hunting & Shooting Ask The Gunwriters 30-06 AI Pressure

Wondering if anyone knows what the chamber pressure specs are for the 30-06 AI loads in Nosler #6 as compared to the 30-06 in same.

Appreciate it,
tom

The same case, therefore the pressures should be close to the same

JWP, the 280AI loads pressure appear looks to be bumped up a bit over the 280 and I wondered if the same threshold was applied to the 30-06AI.

Tomk,

What you say makes sense because I think most factory ammo for both is about the same pressure and rather mild by today's standards.

My best loads for my 30-06 Ack. Imp. are very comparable to those found in Nosler #6, and I have used them for several years with good results. Mostly, I use IMR4350 with 150 grain bullets for about 3050 to 3100 fps in a 24" barrel.

M Bell