Home Forums Gear Free Classifieds Pay It Forward

I could use the springs, but don't know which one I need. Can anybody shed a little light on which springs are for which loads??

I was using them in a 9mm, not a .45, so I can't help you out with that.

kciH, I will take the springs. My 70 series Combat can use them.

Previous Pif: 20 ga. Wichoke, Holden Ironsighter scope mounts for Remington, and paperback "Wingshooter's guide To North Dakota".

PM'ing info.

Have a synthetic stock-been told for pre64 model 70 it's painted krylon got it from auction. Can email pics if you pm me.

250ish pcs of 25acp

Few pcs of 6.8

Pm works best

Long or short action?

Anyone got any stray .284 bullets, 150 to 175 grain range? I'm looking to see what my 7x57 likes best.

Thanks!

FC

Not sure on action size can measure holes if needed. Not a win guy not sure on variants

I'll try to breathe life back into this thread.
I've got appx one box of 44 mag brass, slightly discolored in places, but fine to shoot, just not all flashy shiny.

pay it forward with something else.

D-Day book on it's way to gophergunner. A great read, thanks and don't forget to sign it.

best,

Recoil Rob

Will do Rob-who wants it after me?

Colorado1135, I have a friend looking for a 44, he will need brass. I'll take the brass and PIF w/ an RCBS 38 Spl seater die.

I'll take it on Cowboybart's seater die-PIF to come as soon as I hear from Bart.

The 38 seater is yours

My PIF for Bart's seater die is 2 cable style gun locks.

.44 brass goes to cowboybart

keepin it goin, still givin away drip oilers. Handy-est little applicators for your fancy oils.

corelokt isn't kidding about these drip-oilers guys, they are the cats azz for putting small amounts of oil just about anywhere. Perfect for using Hoppes #9 or Butch's Bore Shine on patches - no dipping, no dripping, just solvent exactly where you want it, on the patch or the brush.

Anything you could use in trade for some oilers?

I know for a fact that somewhere in my garage are at least 3 sets of Leupold Standard (windage adjustable) rings, and at least a couple sets of bases for Remington 700s. One set is stainless, I'll have to go look at the rest. I bought a pile of Talleys and have been replacing everything with those.

Obviously I don't think terribly highly of these rings, and I'm not sure on the condition of them off the top of my head, but the price is right.

If you want a set, post it up here, and please PM me to get my attention.

cwh2, I need a set of Rem 700 bases and med rings if you have them. If you had gloss that would be awesome, but I'll take whatever you may have. In trade, I have a set of steel weaver style 1" rings (med) and a set of factory CZ rings that need a few screws, you may need them for parts. Thanks much Dave