Home Forums Hunting & Shooting Hunting Rifles Which is better rifle - Remington 760 or 7600?

I have the chance to buy either a 760 or 7600 in 35 Whelen, both new in box, both same price. Is there a benefit to one over the other? What kind of accuracy can be expected with a 3-9 scope?

Personally,I would choose the 760.I feel the older Remingtons of that period are made better, out of better materials.Personally.

IIRC, the newer 7600s have fewer, but larger, locking lugs on the bolt, otherwise, they are about the same. I'd agree with the previous statement about the older rifles being built better, but I think I'd rather have larger lugs.

Either way, it's ten times the rifle a 742 or 7400 is.

I don't think remington ever chambered the 760 in 35 whelen.

760

Landrum

I think there is two versions of the 760, one with the barrels free floating, and older ones with the barrel connected to the slide with a hangar type set-up. I beleive the change took place around 1968. I own a 760 made in 72 that shoots great. The barrels that remington used in the 70's and 80's for the most part were very well made. The 760 has better irons imo. The 7600 has a higher comb, and less lugs as pointed out above.

Slam dunk for me it'd be the 760...

Dober

I have owned both why do you feel the 760 is better?

I have several 760's in 30.06 caliber with a wide variety of scopes from 3x9 Leupold's and one cherry Herter's flip mount scope (with a range finder out to 500 yards). The 7600 is a fine rifle, however the quality and workmanship of the 760 far exceeds the 7600. Grab every 760 you can find in any caliber from .270 to 35 Remington and any 30.06.

I have both. I like them both a lot. The 760 is an '06. Shoots into an inch with Varget and Barnes 130 TTSXs. Doesn't particularly care how much Varget as long as it's close to 51 grains The 7600 is a .243 that came with a messed up barrel. I bought it cheap and put $200 into a new barrel. It wears a Leupy 1-4x24 so keeping them all in an inch is harder, but it is pretty consistent at it. I used to have a 760 in 308. I gave it to a friend and it still shoots into an inch. The ones without the fore end hanger are easier to get that accuracy out of.

They work. They shoot better than you have any right to ven hope for. They are reliable. They are ridiculously easy to work on. And... if you get a bad one they are cheap enough that you can go buy another and still be OK with the money you spent.

I forgot how much nicer the bluing was on the old guns. I just spent the last 15 minutes looking up 760's ..talk about nostalgia.

I like the wide range of bullets that you can put through the .06 from 110 grains to 220 grains with very little adjustment in your scope.

Damn I miss having one. I might have to rectify that

Where does the Model Six fit in? I have one and believe they were made for short time between the 760 and 7600.

Go for the 760.

Those damn things point like shotguns. It's a sin to put a scope of them.

Well, I guess you could get see-through mounts...

Rich,
The Model 6 was a 7600 with a Monte Carlo/cheek piece stock and a cartridge head in front of the magazine. The 760 had ADL/BDL grades and the 7600/6 was the continuation of that.

I didn't know they made it in .35 whelen. What a great gun! Get the 760! Flinch

I think they were a "budget" version of the 7600, I may be thinking of the 76 though.

My vote is for the 760 if the barrel is floated, if not, go 7600.

You really won't go wrong with either, they are both great.

The 76 had the plain birch stock.