Home Forums Gear Free Classifieds Pay It Forward

I have a couple of items I do not need, so I will PIF. What are the rules on sending the unfired cartridges? Just put them in the mail? Anyway, here are the items, you may post I'll take it on one or all, but please be sure that you need it.

-48 once shot 270WSM brass-gone to Tom264
-12 once shot 300WSM-gone to Tom264
-20 once shot 30-30-gone to selmer
-13 unfired factory Winchester Grey box 30-30, 170 gr pp.-gone to selmer
-12 unfired 270 reloads, I refused to shoot someone else's reloads. They come in a box with some info written on the outside. I would prefer to send to someone who will pull them and start over.

Use UPS to ship the loaded ammunition, they have guidelines on how to do it, no extra fees. I'll take the 30-30 brass and ammunition. PM sent.

I'll take these..


-48 once shot 270WSM brass
-12 once shot 300WSM

PM inbound

I'll take the 12 270 reloads!

PM on it's way!


Larry

I do infact have a PIF for the above but want to be sure of all the info and components before I list it.

Its coming................

They are yours.

I should get all of these out mid week.

I have some PIF's just got to take the pictures.

For a PIF I can offer up some 1x .223 mixed headstamps - probably around 50? I'd have to count them.

Selmer, Tom, and Larry,
Turns out I have to mail the loaded ammo through our "hub" UPS which is about 25-30 minutes through town to get to. I will be sending it, just need to get to that side of town. I should get it out this week. I'll send each of you tracking info or whatever they give me. Sorry for the delay.

Whenever you get over there, don't make a special trip.

Ditto on what selmer said!

OK here is my pif.

All .40 S&W range brass...all goes to 1 person.

37 Winchester brass
14 Nickle Speer
10 Speer brass
6 Federal brass
5 Nickle brass

72 total.

Hi Tom,
I'll take the brass and PIF with a Lee Case Length Gauge & Shell Holder in 300 WIN. Opened, but unused. Lee part number 90142

Selmer,
I'll take the .223 empty brass.

I'll PIF with:
Lyman .38 special die
Uncle Mikes hammer extension for a Winchester 9422

For a PIF I can offer up some 1x .223 mixed headstamps - probably around 50? I'd have to count them.
_________________________
Selmer

Sorry, I should have posted that the .223 brass is spoken for. My apologies shotgunjock.

Okay here goes my PIF, the first is weaver rifle or pistol rings, the second is open mount rings I know nothing about. Can't figure out what I did but the picture showing is #2 and if you click on the attachment you will see #1.

edited post. carry on

That see-through mounts sure look like the same ones I just put on my buddy's Win. 94 .30-30. Just observing...

mu2bdriver

I can use these PIF with a Lee Case Length Gauge & Shell Holder in 300 WIN. Opened, but unused. Lee part number 90142

My PIF is 2 used aftermarket blued Ruger Mini-14 mags.

Thanks
Mario
dagunnut

Hi Mario,
It's yours. PM incoming.