|
Joined: Mar 2006
Posts: 7,472
Campfire Tracker
|
OP
Campfire Tracker
Joined: Mar 2006
Posts: 7,472 |
I have read many times that you should never shoot a donor rifle. I found a Remington 700 ADL in 7mm mag yesterday that I am guessing was probaly made in the early 1970's. The action was in good shape but the stock showed alot a scratches and dings were someone just did not care about the rifle. I have been wanting a light weight rifle either in 300 win mag or maybe a 257 weatherby so I bought the rifle.
I took the rifle home and cleaned it and I really believe that it was the first time the rifle has ever been cleaned. The rifle's barrel was pretty dirty but came clean very quick. I then adjusted the trigger down to a crisp 3 pounds.
Then I got to thinking that before I have this rifle re-barreled I had better shoot it and make sure there was no problems with the action. So this morning I grabbed a box of 150 grain Remington core-loks and off to range I went.
First group about a inch and quarter but on of the shots was a fouler. The next 4 three shot groups were all under 3/4 of inch.
Now I am sitting here wondering what to do. Buy a set of dies and see if it will shoot better? Or just rebarrel it any way?
Dink
|
|
|
|
Joined: Mar 2010
Posts: 412
Campfire Member
|
Campfire Member
Joined: Mar 2010
Posts: 412 |
That is a tough one right there. Depends on what you got in your stockade. LOL.
Good Luck on that decision.
Tom
|
|
|
|
Joined: Jan 2008
Posts: 4,219
Campfire Tracker
|
Campfire Tracker
Joined: Jan 2008
Posts: 4,219 |
How about the lightweight rifle you want being an accurate 7mm Remington Magnum?
|
|
|
|
Joined: Mar 2006
Posts: 20,958 Likes: 3
Campfire Ranger
|
Campfire Ranger
Joined: Mar 2006
Posts: 20,958 Likes: 3 |
Tough to beat a good ole 700 in 7 RM.
On the other hand, not much really matches a 257 Wby too.
By the way, in case you missed it, Jeremiah was a bullfrog.
|
|
|
|
Joined: Oct 2009
Posts: 7,984
Campfire Outfitter
|
Campfire Outfitter
Joined: Oct 2009
Posts: 7,984 |
4 three shot groups all under 3/4 is pretty good as it is. With the right handload you might be able to just about put them into one hole! That would be one fine accurate rifle. So what happens if you rebarrel and can't get that kind of accuracy? This seems to be a fine example of "never shoot the donor"! I think if it were me I would have to buy the dies just to see what it can really do, since you went this far already. Good luck with your decision.
Bob
Fall seven times, stand up eight.
|
|
|
|
Joined: Apr 2009
Posts: 8,646
Campfire Outfitter
|
Campfire Outfitter
Joined: Apr 2009
Posts: 8,646 |
Its gonna happen everytime with a remington...
|
|
|
|
Joined: Jan 2006
Posts: 932
Campfire Regular
|
Campfire Regular
Joined: Jan 2006
Posts: 932 |
7mm RM dies can be found cheap and used. You discovered the exact reason to never shoot the donor...I did the same with a JC Higgens many moons ago...It was going to be a 280 ackley. Its still a 30-06, and I own 3 of them at the moment.
|
|
|
|
Joined: Feb 2007
Posts: 2,489
Campfire Regular
|
Campfire Regular
Joined: Feb 2007
Posts: 2,489 |
Good for you. My Remington 7 mag is an dependable as a hammer.
I suggest finding some 140's it likes and forget about that .257 W. And refinish the stock while you are at it. Or give it to a best friend that needs a good hunting rifle. 7 mags will do a lot of killing.
stumpy
|
|
|
|
Joined: Mar 2006
Posts: 7,472
Campfire Tracker
|
OP
Campfire Tracker
Joined: Mar 2006
Posts: 7,472 |
I forgot to tell everyone that the pressure pad in the stock has rubbed all the blueing off the barrel from contact.
I was so sure that the gun would not shoot very well and with the pressure pad in place I was just positive that it would not shoot well. Now I am afraid to remove the pressure pad.
I do happen to have a remington ti stock that I could drop it in I guess.
Decisions....decisions...
Dink
|
|
|
|
Joined: Jan 2008
Posts: 4,219
Campfire Tracker
|
Campfire Tracker
Joined: Jan 2008
Posts: 4,219 |
"I do happen to have a remington ti stock that I could drop it in I guess."
Sounds like destiny to me!!
|
|
|
|
Joined: Oct 2006
Posts: 10,092
Campfire Outfitter
|
Campfire Outfitter
Joined: Oct 2006
Posts: 10,092 |
Have Karl sexy up the bolt and re-cut the crown for a custom look, bed it in the McMillan of choice and be done. I would be happy, hell that accurate donor just saved you hundreds!!
It�s a magazine not a clip......
Advice is seldom welcome, and those who need it the most, like it the least.� - Lord Chesterfield. 1750
|
|
|
|
Joined: Jan 2009
Posts: 1,222
Campfire Regular
|
Campfire Regular
Joined: Jan 2009
Posts: 1,222 |
Leave it alone or send it to me!
"That God could and would, if He were sought."
|
|
|
|
Joined: Aug 2002
Posts: 11,109
Campfire Outfitter
|
Campfire Outfitter
Joined: Aug 2002
Posts: 11,109 |
... I do happen to have a remington ti stock that I could drop it in I guess.
Decisions....decisions...
Dink Depends on what you were holding that Ti for .... prolly will have to open the barrel channel.
George Associate Gypsy Order of Sleepless Knights ... That is when I carried you ...
|
|
|
|
Joined: Mar 2006
Posts: 20,958 Likes: 3
Campfire Ranger
|
Campfire Ranger
Joined: Mar 2006
Posts: 20,958 Likes: 3 |
I bought a 700 7RM a couple of years ago from a guy that had never taken the cosmoline wrap off of it. It was 27 years old. It took forever to get that "beeswax" off of it. Sold the original stock to a CF member, set it in a B&C Alaskan, took it to the range and it will put 5 consecutive shots in the same hole with 150 Scirocco's.
Typical performance from an out of the box 700 for that era.
By the way, in case you missed it, Jeremiah was a bullfrog.
|
|
|
|
Joined: Mar 2006
Posts: 7,472
Campfire Tracker
|
OP
Campfire Tracker
Joined: Mar 2006
Posts: 7,472 |
Avagadro I happen to have three of the ti stocks so I guess I could use one.
Anyone know how hard it is to open the barrel channel?
Reloader28 does your 7mm seem to have a slightly heavier barrel contour than the new sps guns? I was looking at a new sps that a guy bought also in 7mm mag and this one seems to have a slightly heavier contour.
Dink
|
|
|
|
Joined: Nov 2006
Posts: 1,352
Campfire Regular
|
Campfire Regular
Joined: Nov 2006
Posts: 1,352 |
DINK, I bought a 7mm Mag a few years ago because of a good deal with intentions of a 257 Wby. Made the same mistake you made. I had no need at the time for a 7 mm Mag, and it is now one of my favorites. Consistent 1/2 groups with 150 grain Nosler BT make it really hard to touch it. The 257 Wby will have to come from another source.
GreggH
|
|
|
|
Joined: Apr 2001
Posts: 28,277
Campfire Ranger
|
Campfire Ranger
Joined: Apr 2001
Posts: 28,277 |
A couple thoughts Dink,
I'd grab some 120's and R22 and see how it perked with them. And I'd grab some 7828 some R25 and some 150 NBT's and see how they perked. Plus I'd wrap a Ti take off around it.
I'm pretty darn sure how it's gonna go...grin
Then I'd dump the 257 idea and go forth and fill up a couple arks with the 7
Dober
"True respect starts with the way you treat others, and it is earned over a lifetime of demonstrating kindness, honor and dignity"....Tony Dungy
|
|
|
|
Joined: Dec 2008
Posts: 1,451
Campfire Regular
|
Campfire Regular
Joined: Dec 2008
Posts: 1,451 |
It would be awful tempting to forget the 257, the McMillan, the Ti and the dies. Go buy some more CorLoct's and hunt most anything ya want......
We eat organic in our house, we just have to shoot and gut it first.....
|
|
|
|
Joined: Mar 2006
Posts: 7,472
Campfire Tracker
|
OP
Campfire Tracker
Joined: Mar 2006
Posts: 7,472 |
Dober I thought for sure you would be part of the re-barrel crowd...grin. Thats not making my decision any easier.
SSB I have had that same thought.
Dink
|
|
|
|
Joined: Jul 2007
Posts: 24,672 Likes: 6
Campfire Ranger
|
Campfire Ranger
Joined: Jul 2007
Posts: 24,672 Likes: 6 |
Dink- A 3/4" group? I'd retube for sure. I really like the 7. And if speed is what you desire, I like Dober's idea of trying the 120's and R22 - it'll put you in the ballpark of 257 Roy speed anyway. (maybe not playing the same game, but at least in the same park) This could be a mute point if you have something in the .284ish arena already. In that case, there IS some cool factor in Roy's baby - I too scratched that itch.
WWP53D
|
|
|
|
401 members (10Glocks, 160user, 17CalFan, 10ring1, 1lesfox, 204guy, 39 invisible),
13,881
guests, and
1,090
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
Forums81
Topics1,195,112
Posts18,542,112
Members74,057
|
Most Online21,066 May 26th, 2024
|
|
|
|