|
Joined: Aug 2006
Posts: 13,000
Campfire Outfitter
|
OP
Campfire Outfitter
Joined: Aug 2006
Posts: 13,000 |
Given that the recoil lug on a Remington 700 must be removed for barrel installation anyway are there any drawbacks to adding an aftermarket recoil lug, such as a Hollands or Badger, if the gun is going to be restocked as well? Or, put another way, but for the requirement of some minor inletting work with aftermarket lugs, is there any reason to retain the factory lug when rebarreling?
|
|
|
|
Joined: Mar 2008
Posts: 4,016
Campfire Tracker
|
Campfire Tracker
Joined: Mar 2008
Posts: 4,016 |
Your factory lug not strong enough? You can change it, but I have not seen any real world improvements, (Hunter Benchrest, Metallic Silhouette) from doing so. But if you want to, by all means change it.
Democracy is not freedom. Democracy is two wolves and a lamb voting on what to eat for lunch. Freedom comes from the recognition of certain rights which may not be taken, not even by a 99% vote. *Marvin Simkin* L.A. Times (1992)
|
|
|
|
Joined: Feb 2005
Posts: 15,565
Campfire Ranger
|
Campfire Ranger
Joined: Feb 2005
Posts: 15,565 |
|
|
|
|
Joined: Jan 2009
Posts: 10,102
Campfire Outfitter
|
Campfire Outfitter
Joined: Jan 2009
Posts: 10,102 |
Your factory lug not strong enough? You can change it, but I have not seen any real world improvements, (Hunter Benchrest, Metallic Silhouette) from doing so. But if you want to, by all means change it. I agree with the post above. If it makes you feel better do it. Otherwise, I doubt you will see any gain. Defiance machine also sells them. .312 is there standard size.
|
|
|
|
Joined: Aug 2004
Posts: 7,578
Campfire Outfitter
|
Campfire Outfitter
Joined: Aug 2004
Posts: 7,578 |
It makes sense to flat grind a factory lug to make sure the thickness is completely consistent. Cost of doing that is nearly that of a replacement, and you get a better design with the aftermarkets (drafted sides make bedding easier.)
|
|
|
|
Joined: Mar 2002
Posts: 9,130
Campfire Outfitter
|
Campfire Outfitter
Joined: Mar 2002
Posts: 9,130 |
Hollands .250 stainless lug is the one you want!
|
|
|
|
Joined: Nov 2005
Posts: 3,507
Campfire Tracker
|
Campfire Tracker
Joined: Nov 2005
Posts: 3,507 |
Ackleyfan got it right. You want a Hollands .250.
|
|
|
|
Joined: Jun 2010
Posts: 100
Campfire Member
|
Campfire Member
Joined: Jun 2010
Posts: 100 |
Pinning an aftermarket or factory lug is a good idea so if you need to have the barrel removed in the future there is no need to rebed the action.
|
|
|
|
Joined: Dec 2004
Posts: 10,346
Campfire Outfitter
|
Campfire Outfitter
Joined: Dec 2004
Posts: 10,346 |
How will pinning the recoil lug keep you from having to rebed? I don't rebed when I do a barrel change. Butch
|
|
|
|
Joined: Jan 2005
Posts: 10,266
Campfire Outfitter
|
Campfire Outfitter
Joined: Jan 2005
Posts: 10,266 |
butch ... pinning the lug just makes sure that when you remove the barrel and lug to put a new tube on, the lug ends up in exactly the same position relative to the action as it was when the original barrel was installed.
If the recoil lug is not in the same position for the new barrel - and if the bedding for the lug is very tight (as it should be), the lug will dictate how the action sits in the stock. If that happens, the action can be canted when set back in the stock. Now, when you go to torque the action screws down, you are creating stress between the action and the recoil lug, which may result in problems.
-WGM-
|
|
|
|
Joined: May 2003
Posts: 3,284
Campfire Tracker
|
Campfire Tracker
Joined: May 2003
Posts: 3,284 |
butch ... pinning the lug just makes sure that when you remove the barrel and lug to put a new tube on, the lug ends up in exactly the same position relative to the action as it was when the original barrel was installed.
If the recoil lug is not in the same position for the new barrel - and if the bedding for the lug is very tight (as it should be), the lug will dictate how the action sits in the stock. If that happens, the action can be canted when set back in the stock. Now, when you go to torque the action screws down, you are creating stress between the action and the recoil lug, which may result in problems. Only if the guy putting the barrel on don't know what he's doing.
+Professional member American Custom Gunmakers Guild
|
|
|
|
Joined: Dec 2004
Posts: 10,346
Campfire Outfitter
|
Campfire Outfitter
Joined: Dec 2004
Posts: 10,346 |
WGM probably doesn't have the proper tools to orient the recoil lug when putting the barrel on Jim. Butch
|
|
|
|
Joined: Jun 2010
Posts: 100
Campfire Member
|
Campfire Member
Joined: Jun 2010
Posts: 100 |
Butch, Jkob
How do you guys make sure the lug is perfectly straight? Pinning always seemed like the easiest way to keep everything straight as there seems to be too much variation in lugs.
Dale
|
|
|
|
Joined: Dec 2004
Posts: 10,346
Campfire Outfitter
|
Campfire Outfitter
Joined: Dec 2004
Posts: 10,346 |
If you reuse the same recoil lug the special tool will line it up properly. Butch
|
|
|
|
Joined: Jan 2005
Posts: 10,266
Campfire Outfitter
|
Campfire Outfitter
Joined: Jan 2005
Posts: 10,266 |
WGM probably doesn't have the proper tools to orient the recoil lug when putting the barrel on Jim. Butch wow ... what a good guess there ... seeing as I'm not a gunsmith though, it shouldn't be surprising that I don't have the tools to do it. I'll bet you don't have the tools to drive 80' long precast concrete piles, do you? See how easy this is? ... (grin)
-WGM-
|
|
|
|
Joined: Jan 2006
Posts: 18,453
Campfire Ranger
|
Campfire Ranger
Joined: Jan 2006
Posts: 18,453 |
How will pinning the recoil lug keep you from having to rebed? I don't rebed when I do a barrel change. Butch Butch, do you free float up to the lug or do you bed the chamber area.
|
|
|
|
Joined: Jun 2010
Posts: 100
Campfire Member
|
Campfire Member
Joined: Jun 2010
Posts: 100 |
special tool? kleindorst?
|
|
|
|
Joined: Dec 2004
Posts: 10,346
Campfire Outfitter
|
Campfire Outfitter
Joined: Dec 2004
Posts: 10,346 |
WGM, You're right, but I don't try to do it either. I leave it to the experts. I bed up to the chamber. Butch
|
|
|
|
Joined: Jan 2005
Posts: 10,266
Campfire Outfitter
|
Campfire Outfitter
Joined: Jan 2005
Posts: 10,266 |
Please, tell me when I said, or even implied, that I have ever attempted a re-barrel job myself, much less even even contemplated it.
not jabbing at you, but rather just pointing out that I simply provided an explanation as to why it's done ... never even said it was necessary.
-WGM-
|
|
|
|
Joined: Dec 2004
Posts: 10,346
Campfire Outfitter
|
Campfire Outfitter
Joined: Dec 2004
Posts: 10,346 |
Not trying to give you a hard time, but when you are stating how it would be, you are open to correction. This is how things get started when somebody says something that they heard in a bull session and states this is how it is. Butch
|
|
|
|
464 members (160user, 17CalFan, 1Longbow, 12344mag, 10gaugeman, 10ring1, 42 invisible),
2,127
guests, and
1,150
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
Forums81
Topics1,192,377
Posts18,488,460
Members73,970
|
Most Online11,491 Jul 7th, 2023
|
|
|
|