According to Quickload 3.5, I should be generating 81,500 psi with the below load taken from Barnes, but I had no pressure signs at all. Did not check velocity. Barnes tested with a 20" barrel too, so maybe 2825 fps? At 60.0 grains, chamber PSI is 70,849!
62.0 grains of TAC, 200 grain Barnes TSX, Rem brass, Fed GM215M primers, and a COL of 2.814". Rifle is an older Rem Custom Shop Model 7 KS, 20" barrel.
Barnes has loads listed up to 64.0 grains of TAC.
How can I contact Quickload to discuss the discrepancy?