|
|
Joined: Dec 2007
Posts: 3,366
Campfire Tracker
|
OP
Campfire Tracker
Joined: Dec 2007
Posts: 3,366 |
Does any one have the steps to remove a trigger assembly on a Browning a-bolt? And of course the plan is to put it back on once it is bedded. Thanks in advance.
Last edited by KLM; 02/29/12.
|
|
|
|
Joined: Oct 2008
Posts: 1,628
Campfire Regular
|
Campfire Regular
Joined: Oct 2008
Posts: 1,628 |
Flip the barreled action upside down. Remove the 5/16 socket screw at the rear of the trigger. Drift the roll pin from the front of the trigger. Lift the assembly away from the receiver. Pay attention to where and how the bolt lock pin fits in it's hole. When you reattach the trigger assy, you start by guiding the bolt lock pin in it's hole first and then lower the remainder of the group into position.
Lock, Stock and Barrel gunworks SLC, Ut USMC 69-73
"This is my rifle, there are many like it but this one is mine. My rifle is my best friend, it is my life."
|
|
|
|
Joined: Dec 2007
Posts: 3,366
Campfire Tracker
|
OP
Campfire Tracker
Joined: Dec 2007
Posts: 3,366 |
+1 for some great instruction. Directions worked perfect. Thank you!!
|
|
|
|
Joined: Feb 2002
Posts: 7,207 Likes: 1
Campfire Tracker
|
Campfire Tracker
Joined: Feb 2002
Posts: 7,207 Likes: 1 |
Replace spring with ink pen spring for a 1 1/2 lb trigger pull!
|
|
|
|
95 members (808outdoors, 10gaugemag, 7mm_Loco, AdventureBound, 20 invisible),
14,524
guests, and
1,160
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
Forums81
Topics1,195,228
Posts18,543,984
Members74,060
|
Most Online21,066 May 26th, 2024
|
|
|
|
|