|
Joined: Feb 2006
Posts: 6,876
Campfire Tracker
|
OP
Campfire Tracker
Joined: Feb 2006
Posts: 6,876 |
Ok, were gonna buy a place here shortly. My question is what does it cost to build a shop?, say 25x40 or around there. Its gotta be insulated, heated and wired for 220. What would i be looking at? Is there a local company that sells prefabs?
Thanks
|
|
|
|
Joined: Mar 2008
Posts: 4,116
Campfire Tracker
|
Campfire Tracker
Joined: Mar 2008
Posts: 4,116 |
Good luck, Joel. I can't help you with AK prices, but I built a very similar shop (36x42) in OR a few years back. I did all the foundation work myself (scraped the land flat with a buddy's tractor and then brought in lots of rock and spent a day with the tractor spreading it and a few hours with a rented compactor compressing it). Had the shop built around the rock work, then did all the rebar work myself (laid and tied the mats together 1' on center) and then had a concrete guy come in and do the heavy labor placing the concrete and doing the sawcuts to keep it from cracking. My shop isn't insulated, but does have 220 and multiple outlets and a loft, two 14' garage doors with electric openers, and a man door and I paid right around $16000 for everything. I dumped another $2500 into it last winter by building a man cave under the loft (sheetrock with texture and finish, bamboo floors, heat, LED lights, huge reloading bench, flat screen tv, furniture, etc). I got a quote for spray in insulation for the whole shop a year ago and it was around $3000. 1/3 of that was labor for moving everything out. If I did it again, I'd have had them put regular 6" fiberglass insulation in, just like I did in the mancave. Should be able to get that for a few thousand more.
I keep a 25 foot boat and my 1 ton truck in mine. When I went to build it, I was going to do a 24x36 and a buddy talked me into going as big as my space would allow (36x42). I can't believe I'm saying this, but I wish I could have gone bigger. I'm a huge proponent of building as big as you have space for - you'll fill it up, and if you don't, it looks that much more clean.
|
|
|
|
Joined: Aug 2003
Posts: 17,491
Campfire Ranger
|
Campfire Ranger
Joined: Aug 2003
Posts: 17,491 |
If you have driving access to a place like Anchorage, it'll be about half price. ![wink wink](/ubbthreads/images/graemlins/default/wink.gif)
Sometimes, the air you 'let in'matters less than the air you 'let out'.
|
|
|
|
Joined: Dec 2005
Posts: 40,179
Campfire 'Bwana
|
Campfire 'Bwana
Joined: Dec 2005
Posts: 40,179 |
There's a few different options. Price is dependent on if you will have to get a permit and inspections or not (engineering fee's-inspections 500 a pop). Also depending on whether you want any type of water in your building. No water, you should be able to do a slab on grade, provided you blue board the entire monolith, and have adequate overhang with your trusses, and provide proper drainage. If you want running water in your shop, you'll have to provide a foundation that meets frost depth requirements, or in floor heat, otherwise you'll have frozen pipes. Your choices are masonry, frame, metal, or a combination of those. The cheapest way to build it, is to hire the labor for cash while you pay for materials.
Son of a liberal: " What did you do in the War On Terror, Daddy?"
Liberal father: " I fought the Americans, along with all the other liberals."
MOLON LABE
|
|
|
|
Joined: Dec 2005
Posts: 4,317
Campfire Tracker
|
Campfire Tracker
Joined: Dec 2005
Posts: 4,317 |
I'm in the same boat - bought a house without a garage, and need to build a shop. I'll be watching this thread...
I've kind of come around to the idea that you only have to pay for it once, and you have to put up with it forever. So, if it costs more than I want it to, I'm going to just deal with that...
|
|
|
|
Joined: Mar 2003
Posts: 5,840
Campfire Tracker
|
Campfire Tracker
Joined: Mar 2003
Posts: 5,840 |
Joel,
Are you in Anchorage or the valley? I have a good friend in the valley who specializes in remodels, sheds, cabins and garages. PM me if you would like his contact info.
Mart
Chronographs, bore scopes and pattern boards have broke a lot of hearts.
|
|
|
|
Joined: Jan 2010
Posts: 15,360
Campfire Ranger
|
Campfire Ranger
Joined: Jan 2010
Posts: 15,360 |
Hummm, I just finished up my shop this past summer and building 40 miles from town cost $$ in these parts..�� 28x42x10� high with 12� wings for big boy toy storage full length on both sides. A 6� toy door on this end and a 12� x 8.5 door on the other �.. radiant floor heat (that I have yet to hook up/using monitor-toyo� 73� now) 2x8s 2� on center r30+ walls r60 in the roof with a 36� shower a chiter and a 6 foot 2 hole ss sink (like those used in a restaurant) shelves inside full length on both sides, inside and out��.. all of them above your head so as to not use any floor space��.�on Both sides of the 6� toy door in the pic below is 8� of counter top and cabinets and shelving btw;if its needed in a shop i put it in!....I - well me and the wife did all the work ourselves other that pouring the slab.75000.00 working on the house as we go�. It is slower and spendier �.. since the last house "I" have gotten 15 years older.... Slow and steady wins the race.
ps- cansome one .... DONE! thanks!
I work harder than a ugly stripper....
|
|
|
|
Joined: Feb 2006
Posts: 6,876
Campfire Tracker
|
OP
Campfire Tracker
Joined: Feb 2006
Posts: 6,876 |
Thanks guys. I'm not looking for much (as of right now)..
Basically 1 garage door, preferably 12', a man door and enough room to pull an engine, etc in the warmth if its winter time. I'm just trying to come up with a ball park since I will have a set amount to spend on a house, property and a shop. Even if I get it up next summer and work on it in bit by bit.
I'm in the valley so it will make it easier having SBS, lowes and Home Depot nearby.
|
|
|
|
Joined: Mar 2012
Posts: 70
Campfire Greenhorn
|
Campfire Greenhorn
Joined: Mar 2012
Posts: 70 |
Check out the sbs website. They have some pre fab kits for shop building.I am not sure if any of them meet any of your specs. But, I have a buddy that just built one of there kits for a shop with a little woodstove and its pretty sweet. There are alot of companies down south that offer steel building kits at approx your specs. May have to drive down and pick it up though. I have been looking in Alaska and have not seen any. Might be a good bizz to be in...
|
|
|
|
Joined: Dec 2005
Posts: 40,179
Campfire 'Bwana
|
Campfire 'Bwana
Joined: Dec 2005
Posts: 40,179 |
That just saved you 10 grand on engineering, inspection fee's and permits
Son of a liberal: " What did you do in the War On Terror, Daddy?"
Liberal father: " I fought the Americans, along with all the other liberals."
MOLON LABE
|
|
|
|
Joined: Dec 2005
Posts: 4,317
Campfire Tracker
|
Campfire Tracker
Joined: Dec 2005
Posts: 4,317 |
Here's atvalaska's pics... sorry for the delay. ![[Linked Image]](http://i289.photobucket.com/albums/ll201/cwh2/IMG_0908.jpg) ![[Linked Image]](http://i289.photobucket.com/albums/ll201/cwh2/House4.jpg)
|
|
|
|
Joined: Dec 2009
Posts: 918
Campfire Regular
|
Campfire Regular
Joined: Dec 2009
Posts: 918 |
If you choose to wire it yourself, let me know. I can give you a few pointers or even possibly some help.
|
|
|
|
Joined: Jan 2010
Posts: 15,360
Campfire Ranger
|
Campfire Ranger
Joined: Jan 2010
Posts: 15,360 |
thanks for posting my pic's! that center window on the right side of the house is 5x8 and at 482 lbs was a cuss fest putting it in...the one above that is a 4x8 1/2 round that matches the 2x4 1/2 round in my stairwell tower...
I work harder than a ugly stripper....
|
|
|
|
Joined: Jan 2001
Posts: 21,317
Campfire Ranger
|
Campfire Ranger
Joined: Jan 2001
Posts: 21,317 |
~$50k You might want to look into Arctic Fox http://arcticfoxsteelbuildings.com/ ![[Linked Image]](http://arcticfoxsteelbuildings.com/images/30x40/30x40x14/30x40_3.jpg) Their 30X40 toy box would make for a fine shop, but even though the steel building is $17k, by the time you add foundation, heating, insulation, roll up door, fabrication, electrical et al you'll be close to $50k. A buddy in the valley had a stick built shop and he said all said and done is right around $50k. You could certainly save some $ by doing all the work yourself, but I'd budget at least $30k for materials. That's why I keep thinking if I do move the new house will have to have a shop, because I know I won't have the coin lying around to build one. I'm still looking for either the right house with a shop, or the right land to build on.
|
|
|
|
Joined: Mar 2012
Posts: 70
Campfire Greenhorn
|
Campfire Greenhorn
Joined: Mar 2012
Posts: 70 |
~$50k You might want to look into Arctic Fox http://arcticfoxsteelbuildings.com/ ![[Linked Image]](http://arcticfoxsteelbuildings.com/images/30x40/30x40x14/30x40_3.jpg) Their 30X40 toy box would make for a fine shop, but even though the steel building is $17k, by the time you add foundation, heating, insulation, roll up door, fabrication, electrical et al you'll be close to $50k. A buddy in the valley had a stick built shop and he said all said and done is right around $50k. You could certainly save some $ by doing all the work yourself, but I'd budget at least $30k for materials. That's why I keep thinking if I do move the new house will have to have a shop, because I know I won't have the coin lying around to build one. I'm still looking for either the right house with a shop, or the right land to build on. Nice shop!!!
|
|
|
|
Joined: Dec 2005
Posts: 40,179
Campfire 'Bwana
|
Campfire 'Bwana
Joined: Dec 2005
Posts: 40,179 |
really nice. I like the cultured stone.
Son of a liberal: " What did you do in the War On Terror, Daddy?"
Liberal father: " I fought the Americans, along with all the other liberals."
MOLON LABE
|
|
|
|
Joined: Jan 2010
Posts: 15,360
Campfire Ranger
|
Campfire Ranger
Joined: Jan 2010
Posts: 15,360 |
cool, its "foam"...fools everyone.... looks like the "shifts" soil i got here ..... wife wants me to do the stair well tower...of the house in it. http://www.genstoneproducts.com/simulated-stacked-stone-coronado
I work harder than a ugly stripper....
|
|
|
|
Joined: Dec 2005
Posts: 40,179
Campfire 'Bwana
|
Campfire 'Bwana
Joined: Dec 2005
Posts: 40,179 |
yep fooled me. Pic is too small to see the joints on the sill. looks good.
Son of a liberal: " What did you do in the War On Terror, Daddy?"
Liberal father: " I fought the Americans, along with all the other liberals."
MOLON LABE
|
|
|
|
Joined: Jun 2001
Posts: 32,080
Campfire 'Bwana
|
Campfire 'Bwana
Joined: Jun 2001
Posts: 32,080 |
It's going to cost more than you have budgeted, take more time, and it won't be big enough... I can see I already need more space... noticed that before the slab was cured.... ![smile smile](/ubbthreads/images/graemlins/default/smile.gif) I'm working on a 32X40 with 16 foot walls, heated slab, 2 garage doors (one 12X12), bathroom - sans bath. Had contractors do the slab, framing, siding, roof installation, ceiling drywall, and garage door insulation. Still need contractors to do the boiler (on hand) hook up - including gas line from the house hook-up. I'll probably have him do the basic PEX bathroom plumbing at the same time. Also need a contractor to blow in ceiling insulation. Those two jobs are gonna cost upwards of $7K, I think. Then I can finish the beast off myself, given time and money. I still need to finish some of the outside trim and inside wiring, wall insulation, inside wall sheeting and finish, install ceiling lights (on hand), and Epoxy (on hand)seal the bathroom floor. I probably have nearly all the remaining wiring stuff I need. Do not have the rest of the insulation, nor interior wall coverings (I want to back the sheetrock with 1/2 inch plywood - but may forgo that...). Also there will be a partial loft over the bathroom and part of the garage space, with outside entry from the future greenhouse on the hill side, at the 8 foot wall level. I originally designed it with 14 foot walls, but had to go with 16 to get the greenhouse door to fit - cost me another $200 in materials, but probably saved more than that in labor just not having to cut the T-111. I designed this to be fairly readily convertable to a complete house, or a couple rental apartments in the future if wished or necessary. I've burned thru the original $75 K budget already, plus a few K out of pocket, doing as much of the work myself as I felt competent to do and had the time for. (Kinda hard when one is living 500 miles away at the time.... :)). Outside, I still have a bit of retaining wall, backfill, a partial loft, and then a heated-slab attached greenhouse in the future. Also a couple of the house windows to install, as we need to replace those- they are 5X8's so aren't going to be cheap, either. But the garage is enclosed and usable right now, even if unheated. If I don't die first, and if I can keep the wife employed, I'll get this thing done yet... It's been a decade in the planning and implementation so far, probably take another one to finish, financially. ![smile smile](/ubbthreads/images/graemlins/default/smile.gif) That should give you an idea of what you are getting into, here, Joel... ![smile smile](/ubbthreads/images/graemlins/default/smile.gif)
The only true cost of having a dog is its death.
|
|
|
|
Joined: Apr 2011
Posts: 12,123
Campfire Outfitter
|
Campfire Outfitter
Joined: Apr 2011
Posts: 12,123 |
Joel,
I can not help you with cost in AK. However, personal experience and that of others, build it as big as you can afford. You will not regret it.
I had a 30 x 70 ft shed built on the side of my barn to house / operate a portable sawmill. I thought 30 x 70 was HUGE. Then I started moving equipment into it. First the sawmill. Then the edger. A skidsteer, an offroad forklift, slab racks, infeed deck for the mill... and... next thing I know, I am out of space and still have stuff sitting outside...
Good luck on your project ! .
|
|
|
|
129 members (2500HD, 300_savage, 1973cb450, 338reddog, 204guy, 338rcm, 19 invisible),
1,750
guests, and
1,056
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
Forums81
Topics1,191,623
Posts18,474,050
Members73,941
|
Most Online11,491 Jul 7th, 2023
|
|
|
|