|
|
Joined: Jan 2011
Posts: 1,691
Campfire Regular
|
OP
Campfire Regular
Joined: Jan 2011
Posts: 1,691 |
I am awaiting the arrival of a Tikka m595 in .243 that I procured here on the 'fire. I am trying to decide what scope to put on it and wonder if the low Talley rings will create a bolt clearance issue for me. I'd prefer to put on a 3-9x40 class Meopro, Conquest, Minox ZA5 (2-10) etc. I am not sure if the large eye piece on the Zeiss or Meopta will clear the bolt and I don't want to mess with new mounts. The Minox eye piece is smaller and I'm certain a VX3 2.5-8x36 will clear easily but I was hoping for some input on the situation from those of you who may have tried this setup. I hate to start pulling scopes that are dialed in just to check clearance. Thanks for your input.
Stros'
|
|
|
|
Joined: Sep 2004
Posts: 29,383
Campfire Ranger
|
Campfire Ranger
Joined: Sep 2004
Posts: 29,383 |
I am awaiting the arrival of a Tikka m595 in .243 that I procured here on the 'fire. I am trying to decide what scope to put on it and wonder if the low Talley rings will create a bolt clearance issue for me. I'd prefer to put on a 3-9x40 class Meopro, Conquest, Minox ZA5 (2-10) etc. I am not sure if the large eye piece on the Zeiss or Meopta will clear the bolt and I don't want to mess with new mounts. The Minox eye piece is smaller and I'm certain a VX3 2.5-8x36 will clear easily but I was hoping for some input on the situation from those of you who may have tried this setup. I hate to start pulling scopes that are dialed in just to check clearance. Thanks for your input.
Stros' I used the same exact rings on a Tikka T3 in 308 and had a Kahles KX 3-9x42 mounted on it with plenty of clearance
|
|
|
|
Joined: Jan 2011
Posts: 1,691
Campfire Regular
|
OP
Campfire Regular
Joined: Jan 2011
Posts: 1,691 |
Good to hear that Kahles fit w/o issue - that should bode well for my options then. Should have it in hand tonight so I can get a feel for what will work best.
|
|
|
|
Joined: Jan 2010
Posts: 103
Campfire Member
|
Campfire Member
Joined: Jan 2010
Posts: 103 |
I have the talley lows on my 595 with 2x7 leupold I am going to the xtra lows next and using the lows on another 595.
|
|
|
|
Joined: Dec 2010
Posts: 1,164
Campfire Regular
|
Campfire Regular
Joined: Dec 2010
Posts: 1,164 |
You will be fine with the lows. The Tikka 595/695 have short 60 degree bolt lift. I have Talley xtra lows on my 695 with a 6x42 scope (slimmer EP but plenty of clearance).
"Good judgment comes from experience but unfortunately, experience is often derived from a series of bad judgments"
|
|
|
|
663 members (1234, 10gaugemag, 007FJ, 10ring1, 10gaugeman, 10Glocks, 67 invisible),
2,719
guests, and
1,385
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
Forums81
Topics1,192,215
Posts18,485,497
Members73,966
|
Most Online11,491 Jul 7th, 2023
|
|
|
|
|