Home Forums Lever Action Central Lever Actions - General 94 barrel band/swivel?

Does anyone make a barrel band with a built in swivel stud for the Winchester 94?

I use an Uncle Mike's band/swivel. It is not a replacement for the original barrel band, but goes around the magazine only. You can position it where you want and it works good. They're sold widely in stores in Canada, should be no problem to get one there.

Thanks cast. I am wanting one that will replace the entire band.

About fifty years ago you could get a swivel for the barrel band that was attached by drilling a hole in the bottom of the band and brading the stud inside. Haven't seen any for sale lately but it don't matter cause you can easily do that your self with a screw stud by turning the screw down to about 1/8" and going from there.

That's a good idea, thanks.

Have found rear barrel band swivels at gun shows. They are the non-datachable version. The version made for Marlin I am told witll also work.

Have found rear barrel band swivels at gun shows. They are the non-datachable version. The version made for Marlin I am told also work.

Thanks eagle.