I have recently installed a 209 ignition setup in my Knight T-bolt. The ignition part of it is fine, the primer handling part is clumsy. Have I missed something here? The little tool supplied with the setup doesn't really work well, but it is practically impossible to place them by hand. The rest of the problem is the debris after firing. Often as not the primer comes apart and if one is not careful disposing of the debris, the anvil portion or something like it will hang up the bolt and prevent the firing pin from striking the subsequent primer or I have problems closing the bolt period. The breech area on this rifle is small and very dark once it is fired, so the debris is not all that noticeable. Does anyone have an idea or different procedure to overcome this little problem?
<br>
<br>Pat
