|
Joined: Mar 2006
Posts: 3,424
Campfire Tracker
|
OP
Campfire Tracker
Joined: Mar 2006
Posts: 3,424 |
My parents gave me their old Honda FR500 tiller. It has been sitting idle for a few years and was seized up. After over a month soaking in kerosene, I gave it a try last night and got it loose. Am I correct in thinking that the rings are probably still stuck, and will soaking longer before starting it and burning off the kerosene help, or should I just try to get it started.
The engine is pretty worn out, but my garden is only about 6X16, so as long as I can get it started and get enough power to run it, I'll leave it alone. I bought a chinese 6.75 torque engine NIB at a garage sale last summer for $35 that I could put on it, but I'd like to keep it Honda if I can.
If you love someone set them free If they come back no one else liked them Set them free again
|
|
|
|
Joined: Jan 2005
Posts: 57,485
Campfire Kahuna
|
Campfire Kahuna
Joined: Jan 2005
Posts: 57,485 |
fabricate.... kroil oil for sure. And then weld up a spark plug base thread to an air hose chuck, that way you fill cylinder(s) with a good amount of kroil and then put maybe 30-40 psi on the cylinder for a time period. I forget how long we used to do it, maybe an hour give or take, and then try to turn it. Very many times the kroil being forced into places, will free it all up and it'll run just fine with no other work.
Have freed more than a few tractor engines like this over the yeras.
I see you are already freed though... but kroil in the ring grooves would be a really helpful thing in totally freeing them. IMHO
We can keep Larry Root and all his idiotic blabber and user names on here, but we can't get Ralph back..... Whiskey Tango Foxtrot, over....
|
|
|
|
Joined: Mar 2006
Posts: 17,289
Campfire Ranger
|
Campfire Ranger
Joined: Mar 2006
Posts: 17,289 |
Get rid of the kerosene and throw some Seafoam in the cylinder and let it soak for a day or more. It will help dissolve any carbon in the rings. Once you get it running add Seafoam to the fuel and oil to attack carbon in the rings from all sides.
|
|
|
|
Joined: Nov 2008
Posts: 11,367
Campfire Outfitter
|
Campfire Outfitter
Joined: Nov 2008
Posts: 11,367 |
1st Special Operations Wing 1975-1983 919th Special Operations Wing 1983-1985 1993-1994
"Manus haec inimica tyrannis / Ense petit placidam sub libertate quietem" ~Algernon Sidney~
|
|
|
|
Joined: Nov 2007
Posts: 47,155 Likes: 1
Campfire 'Bwana
|
Campfire 'Bwana
Joined: Nov 2007
Posts: 47,155 Likes: 1 |
God bless Texas----------------------- Old 300 I will remain what i am until the day I die- A HUNTER......Sitting Bull Its not how you pick the booger.. but where you put it !! Roger V Hunter
|
|
|
|
Joined: Dec 2008
Posts: 555
Campfire Regular
|
Campfire Regular
Joined: Dec 2008
Posts: 555 |
WD40..............Nooo
seaform or Koil "might" work but your best bet is to take it apart and pull the piston...bet the rings are frozen to the piston..you'll never get enough compression to start it..
rusted cylinder too is it's a steel bore
|
|
|
|
Joined: Dec 2006
Posts: 5,918
Campfire Tracker
|
Campfire Tracker
Joined: Dec 2006
Posts: 5,918 |
When I die I hope I don't start voting democrat.
|
|
|
|
Joined: Mar 2006
Posts: 3,424
Campfire Tracker
|
OP
Campfire Tracker
Joined: Mar 2006
Posts: 3,424 |
The last one I did was with WD40. I couldn't find a funnel to put kerosene into it. (kerosene soak is the old family recipe). It started, but didn't have much power. If I have to pull it apart, I'll probably just swap in the Chinese knock off.
If you love someone set them free If they come back no one else liked them Set them free again
|
|
|
|
Joined: Apr 2007
Posts: 948
Campfire Regular
|
Campfire Regular
Joined: Apr 2007
Posts: 948 |
To do it "right" I'd be inclined to go with Jglenn & pull it down. A new set of rings won't set you back much & running a cylinder hone brush up & down a bit will smooth out the walls & get you a good (better anyways) seal. I did a locked up Briggs this way a few years back & put it on a go-kart that's still ruining my yard on a regular basis. Think the ring set cost me about $10 on ebay.
beati pacifici quoniam filii Dei vocabuntur Matthew 5:9
|
|
|
|
Joined: Mar 2006
Posts: 3,424
Campfire Tracker
|
OP
Campfire Tracker
Joined: Mar 2006
Posts: 3,424 |
You're probably right, but I'm not too sure of the availability of parts. Dad said that he couldn't get points and condenser for it anymore. He had been starting it with an electric drill.
If you love someone set them free If they come back no one else liked them Set them free again
|
|
|
|
Joined: Mar 2006
Posts: 17,289
Campfire Ranger
|
Campfire Ranger
Joined: Mar 2006
Posts: 17,289 |
I had a 1970ish Johnson boat motor that seized up from sitting. It was sooo bad that I had pound the pistons out the cylinders (with authoritay) and break the rings out in chunks.
A friend acquired it years ago and it's still running after my "rebuild" back in the 80s.
|
|
|
|
Joined: Jan 2005
Posts: 53,303
Campfire Kahuna
|
Campfire Kahuna
Joined: Jan 2005
Posts: 53,303 |
Member, Clan of the Border Rats -- “Sometimes I wonder whether the world is being run by smart people who are putting us on or by imbeciles who really mean it.”- Mark Twain
|
|
|
|
Joined: Jan 2005
Posts: 53,303
Campfire Kahuna
|
Campfire Kahuna
Joined: Jan 2005
Posts: 53,303 |
I'm not too sure of the availability of parts. PM me the pertinent #'s if it's a Honda, the parts ARE available, and I'll help you chase down a Gasket set and a Piston kit. Sea-Foam Dittos, that or #2 Diesel. GTC
Member, Clan of the Border Rats -- “Sometimes I wonder whether the world is being run by smart people who are putting us on or by imbeciles who really mean it.”- Mark Twain
|
|
|
|
Joined: Mar 2006
Posts: 17,289
Campfire Ranger
|
Campfire Ranger
Joined: Mar 2006
Posts: 17,289 |
Odds are the rings are glued to the pistons but ...
After soaking with Seafoam I'd give it a compression test just to check. If it was near normal then I might think about running it as is.
Last edited by fish head; 12/18/13.
|
|
|
|
Joined: Aug 2003
Posts: 17,491
Campfire Ranger
|
Campfire Ranger
Joined: Aug 2003
Posts: 17,491 |
True, but it does work (though there are other solvents I'd prefer to use) and you can run the engine for a short while using only WD-40 if you don't have the fuel lines hooked up. The danger in running the engine if the rings are stuck is that the rings need to float in order to prevent hot spots and scraping/scoring. Stuck or sticky rings can be bad news for the cylinder.
Sometimes, the air you 'let in'matters less than the air you 'let out'.
|
|
|
|
Joined: Jan 2005
Posts: 53,303
Campfire Kahuna
|
Campfire Kahuna
Joined: Jan 2005
Posts: 53,303 |
Some folks get in too much of a hurry, "Waking Up" old or siezed small engines.
I'm of the opinion that,once freed up, you literally CAN'T spin em' up "Cold" long enough to do ought but good,...e.g. plug(s) out and cylinder(s) WET with the skunk pizz of choice,......I'm not saying one should burn up a starter, either.
Just "woke up" a nice old Kohler that's sat forever,.....been running it in GENTLY, at low RPMs for days now,.......between Sea Foam and diesel poured into it and some obvious wear, it was smoking at first,......not much smoke at all, this evening,.....
Not saying that'll always work, either. Coastal salt rust is pretty onerous, and final.
GTC
Last edited by crossfireoops; 12/18/13.
Member, Clan of the Border Rats -- “Sometimes I wonder whether the world is being run by smart people who are putting us on or by imbeciles who really mean it.”- Mark Twain
|
|
|
|
Joined: Aug 2003
Posts: 17,491
Campfire Ranger
|
Campfire Ranger
Joined: Aug 2003
Posts: 17,491 |
Yep, long as there wasn't heroic effort involved in making the piston move, soaking and getting things moving slowly probably won't be a problem. (I guess I mixed in fishhead's comment about beating the shizzle loose in a different motor. ) Loosening and 'washing' seems to work on a lot of these small motors, since much of the stuff that needs rinsing is corrosion effects rather than carbon, the usual cause of sticking rings.
Sometimes, the air you 'let in'matters less than the air you 'let out'.
|
|
|
|
Joined: Sep 2012
Posts: 8,736
Campfire Outfitter
|
Campfire Outfitter
Joined: Sep 2012
Posts: 8,736 |
Take Fish, Cross, and Klik's words. Seafoam or diesel, soak. Kroil is too expensive, and it won't make much difference what skunk piss you use anyway. You could even run diesel at about 25% or so in the oil too, just don't rev or put a load on it, then drain and fill with your prefered flavor. If it runs good enough to till up a small garden once or twice a year, that's good enough.
Sean
|
|
|
|
Joined: Jun 2006
Posts: 16,393 Likes: 1
Campfire Ranger
|
Campfire Ranger
Joined: Jun 2006
Posts: 16,393 Likes: 1 |
I started a seized Allis Chalmers engine by pulling the injectors, filling the cylinders with a 50/50 mix of diesel and ATF,and giving the concoction TIME to work ( a week or more IIRC ) After breaking the engine loose with a long, homemade wrench, and some help (240# baby brother), it started. We ran it for about a day at a fast idle. Said motor is still running an irrigation pump, after around 20 years - with no excessive oil consumption.
Mark
Thinking back - the mix of diesel and ATF smelled much like Kroil.
M
I've always been a curmudgeon - now I'm an old curmudgeon. ~Molɔ̀ːn Labé Skýla~
|
|
|
|
Joined: Feb 2006
Posts: 6,883
Campfire Tracker
|
Campfire Tracker
Joined: Feb 2006
Posts: 6,883 |
I agree, if the engine was seized its time for a rebuild. If you want a quick fix, I am a believer in Kroil. The stuff works, ive used it extensively for a long time. Another good rust breaker is mouse milk. can be spendy also but it works.
|
|
|
|
603 members (16penny, 10gaugeman, 17CalFan, 1Longbow, 10gaugemag, 160user, 66 invisible),
2,473
guests, and
1,350
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
Forums81
Topics1,192,189
Posts18,484,912
Members73,966
|
Most Online11,491 Jul 7th, 2023
|
|
|
|