Tom ordered the reamer - should be here in a couple weeks...
Good to know! There's a shop up between Sheridan and Kokomo that has been doing them. Their main product is to buy Rem 798 (the mauser thing), rebarrel, then ceracote the stock and metal. The one I handled seemed nice enough.
i am pretty excited about my 2014 build. its going to be my new f-open gun.
Bat M action krieger 30 inch 1.25 pipe precision rifle and tool lowboy stock (blue blue black laminate) with all the hardware haven't decided on rings yet but i definately want the new 2014 model nightforce competition scope
chamber will be 6.5x55 40 deg improved 292 nk reamer provided by ptg throated for 140 hybrids
A .284 win for 1000 yd steel matches is my project right now.
Stiller Predator V action, single shot, RBLP, coned bolt with supplied 20 moa base. Bartlein 33 inch 9tw,1.250x5 straight taper to 1.00, finished at 32" 1" at muzzle .323 nk, .200 FB Harrels' 4 port tactical brake Jewel trigger Bobby Hart LRT stock, non V block.
Should be a real thumper on those plates with the 162s-180s...:)
No new guns for me this year, trying to slow down my gun buying ADD. Made a vow to focus on getting the rifles I have set up like I want (stocks, scopes, turrets, bedding, etc). Also going to finally start loading for them. Picking up all components that I can find and afford. Will work up loads then actually spend my time shooting vs saving money for another pistol I don't need.
I have a 1948 Model 70 action and a 25 cal McGowan at the 'smith's, and a mid fifties Fwt stock with aluminium butt plate here....
These parts are going to make a nice 257 Roberts.
"after the bullet leaves the barrel it doesn't care what headstamp was on the case" "The 221 Fireball is what the Hornet could have been had it stayed in school"
Putting together an AR for my son's college graduation present:
Stiller or Seekins Lower. VLTOR MUR upper. 16" Black Hole barrel, 8" twist, mid-length gas. Troy Tactical 15" Alpha hand guard. Geissele SSA-E trigger. BCM bolt carrier group. BCM H2 Buffer Magpul UBR Stock Battle Comp Compensator Ergo Grip
John
If my people, who are called by my name, will humble themselves and pray and seek my face and turn from their wicked ways, then I will hear from heaven, and I will forgive their sin and will heal their land. 2 Chronicles 7:14
I'm having the chamber end of one of my 308's lopped off and rechambered/refitted using a tighter than SAAMI dimension match reamer. It won't require neck turning, but it will still be a lot closer to cartridge/bullet dimensions in the chamber neck and throat. Even a SAAMI minimum reamer is pretty loose for the 308.
Dean Zollinger is finishing the stock on my 220 Russian(Beggs) minimauser. I will need my 40X rimfire custom stocked, and lastly I need to do my titanium Pierce receiver. It will be a 280AI.
I'm having the chamber end of one of my 308's lopped off and rechambered/refitted using a tighter than SAAMI dimension match reamer. It won't require neck turning, but it will still be a lot closer to cartridge/bullet dimensions in the chamber neck and throat. Even a SAAMI minimum reamer is pretty loose for the 308.
Have you considered a Palma chamber? Short throat will allow you to reach the lands with just about anything.
John
If my people, who are called by my name, will humble themselves and pray and seek my face and turn from their wicked ways, then I will hear from heaven, and I will forgive their sin and will heal their land. 2 Chronicles 7:14
The reamer is a .340" diameter neck, .3085" diameter throat, set up for the 168 SMK which makes it perfect for my favorite plinking bullet, the 168 CC Nosler. If I want to reach the lands with a VLD I'll just hang them out a little.