|
Joined: Oct 2006
Posts: 10,091
Campfire Outfitter
|
OP
Campfire Outfitter
Joined: Oct 2006
Posts: 10,091 |
What is the best way to get it out? Just re-D&T and call it a day? Anyone have a easy trick Rem 700 if it matters..
It�s a magazine not a clip......
Advice is seldom welcome, and those who need it the most, like it the least.� - Lord Chesterfield. 1750
|
|
|
|
Joined: Jan 2003
Posts: 1,667
Campfire Regular
|
Campfire Regular
Joined: Jan 2003
Posts: 1,667 |
I don't think there is a universal best way. I have used edm, left hand drill bit, center cutting end mill. they all have worked but do cause a bit of anxiety. never tried the chemical method.
|
|
|
|
Joined: Mar 2008
Posts: 1,224 Likes: 1
Campfire Regular
|
Campfire Regular
Joined: Mar 2008
Posts: 1,224 Likes: 1 |
Drill a hole down the center with a much smaller diameter bit, then use a left hand bit to pull it out.
Give me land, lots of land, under starry skies above. Don't fence me in.
|
|
|
|
Joined: Aug 2002
Posts: 1,247
Campfire Regular
|
Campfire Regular
Joined: Aug 2002
Posts: 1,247 |
I've had good luck using this technique except I've always used an ez-out instead of the left-handed drill bit.
|
|
|
|
Joined: Dec 2004
Posts: 10,361 Likes: 1
Campfire Outfitter
|
Campfire Outfitter
Joined: Dec 2004
Posts: 10,361 Likes: 1 |
I have the proper carbide endmills that I use. I'm sure it ain't the only way.
|
|
|
|
Joined: Oct 2006
Posts: 10,091
Campfire Outfitter
|
OP
Campfire Outfitter
Joined: Oct 2006
Posts: 10,091 |
Well its out but needs re-tapped. And of course I don't have the proper tap. What are the threads?
It�s a magazine not a clip......
Advice is seldom welcome, and those who need it the most, like it the least.� - Lord Chesterfield. 1750
|
|
|
|
Joined: May 2005
Posts: 9,611
Campfire Outfitter
|
Campfire Outfitter
Joined: May 2005
Posts: 9,611 |
If it's standard...a six by forty eight. powdr
|
|
|
|
Joined: Jan 2012
Posts: 6,800
Campfire Tracker
|
Campfire Tracker
Joined: Jan 2012
Posts: 6,800 |
Brownells has a kit that you just drive the broken screw through the action if possible and shear off the threads.. Then retap for the screws supplied in the kit.. Easy....
|
|
|
|
Joined: Sep 2004
Posts: 8,219 Likes: 1
Campfire Outfitter
|
Campfire Outfitter
Joined: Sep 2004
Posts: 8,219 Likes: 1 |
I freehanded a small drill hole and then used a screw extractor. This was against the advice I received here. Guess I got lucky - it's better to be lucky than good sometimes
|
|
|
|
Joined: Jun 2001
Posts: 296
Campfire Member
|
Campfire Member
Joined: Jun 2001
Posts: 296 |
Sometimes you can use a prick punch to turn the broken screw stub out.
Clemson
|
|
|
|
570 members (257Bob, 270wsmnutt, 160user, 257 roberts, 1lessdog, 1_deuce, 60 invisible),
2,519
guests, and
1,208
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
Forums81
Topics1,194,366
Posts18,527,291
Members74,031
|
Most Online11,491 Jul 7th, 2023
|
|
|
|