|
Joined: Nov 2011
Posts: 3,184
Campfire Tracker
|
OP
Campfire Tracker
Joined: Nov 2011
Posts: 3,184 |
I'm on my third 7 Mag but this is the first I've loaded for. Accuracy wise I have some great loads with 120gr. TTSX, 140gr. Accubond,140gr. BT and I am working with 162gr. SST's right now. Powders that I'm working with has been H1000, Imr7828, R22, and imr4350. Until I can get a chrono I'll hold off on posting my loads. Most are above book but have proven safe in my rifle and a few others.
One that I know is safe. Min. book 52gr. Imr4064 under a Rem 140gr. Psp kissed and lit by a Rem 9 1/2. Light recoil and accurate as all get out.
Anyway 7's are fun and a lot of us here have one or a few. So let's hear what your running.
|
|
|
|
Joined: May 2009
Posts: 2,402
Campfire Regular
|
Campfire Regular
Joined: May 2009
Posts: 2,402 |
Ever shoot any of the old 195gr bullets?
|
|
|
|
Joined: Nov 2011
Posts: 3,184
Campfire Tracker
|
OP
Campfire Tracker
Joined: Nov 2011
Posts: 3,184 |
Ever shoot any of the old 195gr bullets? Send me some and I will!! I have plenty of. .284 to trade. But no LRAB or AMax
Want To Buy; Form die for a 7mm Mashburn Super. .284 Hornady AMax 162gr. .224 Hornady AMax 75gr. 22-250 bushing die Bushing die that will work with the 7mm Mashburn Super A couple Glock 42 380ACP mags
|
|
|
|
Joined: Jun 2009
Posts: 830
Campfire Regular
|
Campfire Regular
Joined: Jun 2009
Posts: 830 |
140TTSX 69g RL22 3122fps @ muzzle .35 145 LRX 65.5 IMR4350 3205 muzzle .31 Still working on the 120TTSX Good luck.
Last edited by mailmanmark; 08/12/14.
|
|
|
|
Joined: Oct 2009
Posts: 1,742
Campfire Regular
|
Campfire Regular
Joined: Oct 2009
Posts: 1,742 |
68 gr H1000 under a 168VLD has been jaw dropping in 2 different guns. Halved the groups I get with 150BTs.
|
|
|
|
Joined: May 2005
Posts: 7,081
Campfire Tracker
|
Campfire Tracker
Joined: May 2005
Posts: 7,081 |
I worked up a standard load of 65gn with the 4350's using bullets between the 145gn LRX, 150gn NBT and PART, 154gn Hornady SP and SST and all shot under an inch with the same die setting which was set for an OAL of 3,282" with the LRX and the others fell where they were for the same die setting.
It was an experiment to see if the load was compatible as I had all of the above bullets, but they all shot under the inch from my model 70. There was some variance in POI however.
John
When truth is ignored, it does not change an untruth from remaining a lie.
|
|
|
|
Joined: Dec 2012
Posts: 77
Campfire Greenhorn
|
Campfire Greenhorn
Joined: Dec 2012
Posts: 77 |
160 accubonds, IMR 7828 and federal 215's is my go to hunting load.
A little over book max and the groups are nice and tight.
|
|
|
|
Joined: Jan 2013
Posts: 155
Campfire Member
|
Campfire Member
Joined: Jan 2013
Posts: 155 |
|
|
|
|
Joined: Aug 2010
Posts: 48,046
Campfire 'Bwana
|
Campfire 'Bwana
Joined: Aug 2010
Posts: 48,046 |
162 A-max and btsp interlocks over a stiff charge of RL25, CCI 250's and R-P brass.. Extremely accurate and run about 3,050 fps..
I try to stick with the basics, they do so well. Nothing fancy mind you, just plain jane will get it done with style. You want to see an animal drop right now? Shoot him in the ear hole. BSA MAGA
|
|
|
|
Joined: Aug 2010
Posts: 48,046
Campfire 'Bwana
|
Campfire 'Bwana
Joined: Aug 2010
Posts: 48,046 |
I worked up a standard load of 65gn with the 4350's using bullets between the 145gn LRX, 150gn NBT and PART, 154gn Hornady SP and SST and all shot under an inch with the same die setting which was set for an OAL of 3,282" with the LRX and the others fell where they were for the same die setting.
It was an experiment to see if the load was compatible as I had all of the above bullets, but they all shot under the inch from my model 70. There was some variance in POI however.
John Pretty cool experiment John. Sounds like you have a damn fine model 70 there. I don't think mine is quite as forgiving. I'd hang onto that one..
I try to stick with the basics, they do so well. Nothing fancy mind you, just plain jane will get it done with style. You want to see an animal drop right now? Shoot him in the ear hole. BSA MAGA
|
|
|
|
Joined: Mar 2009
Posts: 4,408
Campfire Tracker
|
Campfire Tracker
Joined: Mar 2009
Posts: 4,408 |
69.5grs Reloader-22 with 140-150gr 66.0-67.0 grs of Reloader-22 with 160gr 65.3gr IMR4350 with 140-150gr 63.5gr IMR4350 with 160gr This is for my rifles.Remember every rifle is different.I have one 7mag with a 24"Douglas barrel that I load one grain less than my 26" Remington factory barrel to get about the same velocity.
~Molɔ̀ːn Labé Skýla~ As Bob Hagel would say"You should not use a rifle that will kill an animal when everything goes right; you should use one that will do the job when everything goes wrong."Good words of wisdom...............
|
|
|
|
Joined: Jan 2001
Posts: 58,481
Campfire Kahuna
|
Campfire Kahuna
Joined: Jan 2001
Posts: 58,481 |
'22 fueled 162's are KING..............
Brad says: "Can't fault Rick for his pity letting you back on the fire... but pity it was and remains. Nothing more, nothing less. A sad little man in a sad little dream."
|
|
|
|
Joined: Feb 2002
Posts: 7,197
Campfire Tracker
|
Campfire Tracker
Joined: Feb 2002
Posts: 7,197 |
my loads in a Rem 700 are 65.0g of R#22, cci 250's, bullet jammed .003, tad over 3000, bug hole groups in Rem brass
Another,load:
71.0g of Retumbo fed 215 Rem brass 162 3130 fps
If you have trouble with the 162g A max, play with the seating depth. I have one that loves a kiss, another that loves to jump 0.040. Lots of guys give up on the A max due to bullet being particular on how it likes the seating depth in that particular Gun.
A max's have less bearing surface than the 160g Sierra or the 160g Accubond and it does have an effect on pressure.
Moly and wax will do away with vertical at longer ranges, take that to the bank as the standard deviation will drop to single digits.
|
|
|
|
Joined: Jul 2014
Posts: 2,556
Campfire Regular
|
Campfire Regular
Joined: Jul 2014
Posts: 2,556 |
There are lots of good loads for the 7 mag. If you have a 26-inch barrel (and maybe even the 24, but I don't know)try reloder 33 powder with the heavy bullets. 75 grains (75.5 is max) got me 3025 fps with 175s and 3124 with the 160 Part. All shot half inch-ish. I think that powder is overlooked for the 7 mag. My gun shop has gobs of it, as very few shoot the big 338s and most do not realize how great it is in a long-barreled 7.
You did not "seen" anything, you "saw" it. A "creek" has water in it, a "crick" is what you get in your neck. Liberals with guns are nothing but hypocrites.
|
|
|
|
581 members (10Glocks, 12344mag, 10gaugemag, 163bc, 1234, 10ring1, 51 invisible),
2,461
guests, and
1,280
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
Forums81
Topics1,191,803
Posts18,477,480
Members73,944
|
Most Online11,491 Jul 7th, 2023
|
|
|
|