I have read of a method using epoxy to rigid mount the rifle action into the stock so it doesnt move ."glue and screw" Method If so what did you think of it compared to regular epoxy bedding?
Glue and screw was used by benchresters way back when. I haven't heard about it in a very long time. Being able to remove your action has a lot going for it.
Glue and screw was used by benchresters way back when. I haven't heard about it in a very long time. Being able to remove your action has a lot going for it.
IIRC, you had to stick the gun in a freezer overnight to get it out of the stock. Paul B.
Our forefathers did not politely protest the British.They did not vote them out of office, nor did they impeach the king,march on the capitol or ask permission for their rights. ----------------They just shot them. MOLON LABE
The old benchrest glue-in process involved pinned in triggers that could be removed without taking the stock off, as well as barrels that could be replaced with the stock on.
Glue-ins would have more disadvantages with a hunting gun.
I have several Glue-ins form the LV benchrest days. They work well. You have to use extended trigger pins so you can remove the trigger for cleaning, adjusting, etc. since the action is glued to the stock. Then you have to assemble the trigger with short slave pins to reassemble the trigger to the action. A real pain. I have removed one of them from the stock with heat and a wooden wedge, and then glued it back in. I surely wouldn't do a glue-in now. No need. We've perfected the bedding process.
Bob
I met a French guy the other day. I asked him "Do you speak German?" He said "No." I said "You're welcome!"