|
Joined: May 2014
Posts: 1,122
Campfire Regular
|
Campfire Regular
Joined: May 2014
Posts: 1,122 |
[/quote] Huh....Not sure I follow what your saying...Well sure if it won't feed then it is a feeding problem. [/quote]
It is simple rifle build terminology to clarify in precise terms what may or may not be required.
The choice of the word problem is simply a poor choice of words and inaccurately describes what the build may entail. The word problem implies that you may never be able to get the feed to work properly.
Anyways...I am pretty sure you still don't get it but no worries mate.
Shod
Last edited by Shodd; 11/01/14.
The 6.5 Swede, Before Gay Was Ok
|
|
|
|
Joined: Dec 2002
Posts: 1,981
Campfire Regular
|
Campfire Regular
Joined: Dec 2002
Posts: 1,981 |
No worries here for sure but then none of my AI rifle have a feeding problem. YMMV
|
|
|
|
Joined: Jan 2009
Posts: 8,898
Campfire Outfitter
|
Campfire Outfitter
Joined: Jan 2009
Posts: 8,898 |
Thanks to some of the guys here for advice, I will tell my brother to make his a 280 ackley.
Rechambering a factory barrel that isn�t getting the velocity one is looking for is throwing good money at bad. The barrel is likely still going to be slow, but now it will be slow with a few hundred extra dollars sunk into set back/rechambering and new dies. What I�m trying to not so eloquently say is that rechambering won�t fix the slow velocity issue if the barrel has loose bore dimensions. Also, I�m not sure what being a �reloading chicken� is, but a 280 AI isn�t going to change things. If that means your brother backs down when pressure signs are encountered on the brass, he is a smart man, as pressure signs don�t often occur until over 70,000 psi. Have him load some 120 ttsxs at 3150 fps in the factory barrel, and he�ll not want for a 280 AI any longer. Also the idea that a 280 AI is lighter than a 7 mag is just wrong thinking. Same stock, same barrel, same action...the magnum will be slightly lighter because the chamber removes a little more steel. Kimber 84L changes that The problem there being the throat length to magazine length on the Kimber 280 AI. Long throat, not so long mag box. Prairie goat, my brother has a krieger chomoly #2 finished at 22" ready to be reamed, he was debating on either 280 or improved. what's to hurt by going improve, still be able to shoot the old 280 and look cool. It's his gun, so he can build it whatever he likes. As for me, doesn't matter if I am shooting a 7 mag, 308 or 270, I limit all my shots to 300 yards so deer won't know the difference and so do I. You originally mentioned a rechamber, not a rebarrel, hence my comments regarding rechambering. If going with a new barrel, a 280 AI is a fine choice. In fact it's just as good as a 270 or 30-06. P.S. I would seriously consider a SS barrel for a backpack rifle.
|
|
|
|
Joined: Nov 2004
Posts: 10,010
Campfire Outfitter
|
Campfire Outfitter
Joined: Nov 2004
Posts: 10,010 |
I bought that one a few years ago. I took a decent buck with it last year shooting 162 amaxes at 3040 fps. Shot was about 400 yards and it worked well. I had to bed the lug and sand the channel a bit but now it's a sub moa gun and handles like a dream. Bb
|
|
|
|
Joined: Jan 2006
Posts: 18,453
Campfire Ranger
|
Campfire Ranger
Joined: Jan 2006
Posts: 18,453 |
I have had three "improved" 280's, two AI and one RCBS. I have also shot a 280 a lot. My 280 with a longer throat, OAL 3.45, is about 30-35 fps behind the "improved" cases at equal pressures. In a hunting rifle, I would use a 22-23" barrel.
The reason the improved cases are more difficult to get to feed as slickly as a standard is because of the reduced body taper. The shoulder angle has nothing to do with that other than most "improveds" have both.
Also the idea that a 280 AI is lighter than a 7 mag is just wrong thinking. Same stock, same barrel, same action...the magnum will be slightly lighter because the chamber removes a little more steel.
I would get the standard built but have the throat extended. Cases and dies are cheaper. Or just get a 270 or a 7RM.
I've never seen a factory barrel chambered for magnum that didn't haven't a heavier barrel contour (longer shank) than the same rifle chambered for non-magnum rounds. Why do the factories do that ?
|
|
|
|
Joined: May 2014
Posts: 1,122
Campfire Regular
|
Campfire Regular
Joined: May 2014
Posts: 1,122 |
No worries here for sure but then none of my AI rifle have a feeding problem. YMMV By no feeding problem do you mean that no feed work was ever performed for any of your AI's? Shod
The 6.5 Swede, Before Gay Was Ok
|
|
|
|
Joined: Oct 2014
Posts: 80
Campfire Greenhorn
|
Campfire Greenhorn
Joined: Oct 2014
Posts: 80 |
Prairie goat he is having it ceracoted and krieger doesn't make skinny SS barrels for his lightweight project.
|
|
|
|
Joined: Feb 2003
Posts: 18,854
Campfire Ranger
|
Campfire Ranger
Joined: Feb 2003
Posts: 18,854 |
They ain't gonna cerakote the bore. That's where you need the stainless.
Sent from my Dingleberry Handheld Wireless
|
|
|
|
Joined: Jan 2009
Posts: 8,898
Campfire Outfitter
|
Campfire Outfitter
Joined: Jan 2009
Posts: 8,898 |
They ain't gonna cerakote the bore. That's where you need the stainless.
Exactly. Plenty of other manufacturers make skinny barrels in SS. If he's dead set on a Krieger tube, it's no big deal to order one in a heavier contour from someplace like bugholes.net and have a smith turn it down to his preferred contour before screwing everything together.
|
|
|
|
Joined: Feb 2010
Posts: 17,927
Campfire Ranger
|
Campfire Ranger
Joined: Feb 2010
Posts: 17,927 |
59 gr of RL-19, 140 NBT or 140 Barnes TSX, 3020 FPS.
Always liked that rig. For conversation, 57.3 gr. of RL-19 w/ 140 Accubonds averaged 2,954 FPS in my 22" M70 and 60.5 of RL-19 w/ 129 LRX averaged 3,084. I like that powder in my 270, but it didn't show me much speedwise in my 260.
|
|
|
|
Joined: Sep 2006
Posts: 23,638
Campfire Ranger
|
Campfire Ranger
Joined: Sep 2006
Posts: 23,638 |
59 gr of RL-19, 140 NBT or 140 Barnes TSX, 3020 FPS.
Always liked that rig. For conversation, 57.3 gr. of RL-19 w/ 140 Accubonds averaged 2,954 FPS in my 22" M70 and 60.5 of RL-19 w/ 129 LRX averaged 3,084. I like that powder in my 270, but it didn't show me much speedwise in my 260. Never had a 260, so can't comment on it. '19 & '22 are both really good in the 270, 280 & '06. When I go to 150 or heavier in either the 270 or 280, then I prefer RL-22. MM
|
|
|
|
Joined: Sep 2003
Posts: 14,807
Campfire Outfitter
|
Campfire Outfitter
Joined: Sep 2003
Posts: 14,807 |
These Kimber 7mm WSM's and 270 WSM's weigh less than a M70 Featherweight rifle in 280 and are better guns.
I got the 270 WSM Kimber first as many said the 7mm WSM would not make it. Then I had to get a 7mm WSM anyway!
I have not had time to finish the 7mm WSM but it's shooting 168's well. I want to shoot 140's.
The 270 WSM Kimber has been outstanding from the start. I took a very large buck with it. It's shot the 150 gr SST into a 1/2" group at 200 yds the other day and the best part was that it had remained sighted in. Right on at 200 yds!
|
|
|
|
Joined: Dec 2002
Posts: 1,981
Campfire Regular
|
Campfire Regular
Joined: Dec 2002
Posts: 1,981 |
No worries here for sure but then none of my AI rifle have a feeding problem. YMMV By no feeding problem do you mean that no feed work was ever performed for any of your AI's? Shod You got it....
|
|
|
|
Joined: Oct 2014
Posts: 80
Campfire Greenhorn
|
Campfire Greenhorn
Joined: Oct 2014
Posts: 80 |
They ain't gonna cerakote the bore. That's where you need the stainless.
I and many others here in the pacific west have hunted here with blued guns and it doesn't seem to affect us if you take care of your guns and everyone should. Piece of tape over the muzzle and the bore is safe. Matter of fact my brothers gun he is re barreling right now has been to Alaska, Washington, Oregon, California and British Columbia and has shown no rusting or pitting, only a worn out barrel from all the game he shot. Prairie goat, he choosed krieger because he has had accuracy issues with the light buttoned rifle barrels. So he swears by the light cut rifled barrels,
|
|
|
|
Joined: Oct 2014
Posts: 80
Campfire Greenhorn
|
Campfire Greenhorn
Joined: Oct 2014
Posts: 80 |
These Kimber 7mm WSM's and 270 WSM's weigh less than a M70 Featherweight rifle in 280 and are better guns.
I got the 270 WSM Kimber first as many said the 7mm WSM would not make it. Then I had to get a 7mm WSM anyway!
I have not had time to finish the 7mm WSM but it's shooting 168's well. I want to shoot 140's.
The 270 WSM Kimber has been outstanding from the start. I took a very large buck with it. It's shot the 150 gr SST into a 1/2" group at 200 yds the other day and the best part was that it had remained sighted in. Right on at 200 yds! First of all a long action model 70 can be made to just as light or a little over a 8400 wsm with a edge stock, light barrel and bottom metal with talley lw rings. Still a beefier and better action vs the cylindrical 8400 wsm action and no Russian roulette to play.
|
|
|
|
Joined: May 2014
Posts: 1,122
Campfire Regular
|
Campfire Regular
Joined: May 2014
Posts: 1,122 |
No worries here for sure but then none of my AI rifle have a feeding problem. YMMV By no feeding problem do you mean that no feed work was ever performed for any of your AI's? Shod You got it.... Built mine on a mouser action and the claw extractor required some minor work to make it feed well. A push feed would be no "problem" I mean extra work. Shod
The 6.5 Swede, Before Gay Was Ok
|
|
|
|
Joined: Sep 2011
Posts: 2,654
Campfire Regular
|
Campfire Regular
Joined: Sep 2011
Posts: 2,654 |
...I got the 270 WSM Kimber first as many said the 7mm WSM would not make it... If people would stop saying that and others stop buying into it the 7WSM might do well still.
|
|
|
|
Joined: Feb 2003
Posts: 18,854
Campfire Ranger
|
Campfire Ranger
Joined: Feb 2003
Posts: 18,854 |
They ain't gonna cerakote the bore. That's where you need the stainless.
I and many others here in the pacific west have hunted here with blued guns and it doesn't seem to affect us if you take care of your guns and everyone should. Piece of tape over the muzzle and the bore is safe. Matter of fact my brothers gun he is re barreling right now has been to Alaska, Washington, Oregon, California and British Columbia and has shown no rusting or pitting, only a worn out barrel from all the game he shot. Prairie goat, he choosed krieger because he has had accuracy issues with the light buttoned rifle barrels. So he swears by the light cut rifled barrels, Rock Creek is your huckleberry for the ultralight SS cut rifled barrels. But good luck ordering and getting your order.
Sent from my Dingleberry Handheld Wireless
|
|
|
|
Joined: May 2005
Posts: 7,083
Campfire Tracker
|
Campfire Tracker
Joined: May 2005
Posts: 7,083 |
You should be able to get 3000+ fps out of a 22" barrel with 140 grainers no problem. I get 3120 with my favorite 140 grain load with a 23" barrel without pushing it. There is probably a little more there but I have been happy with that load. Today I chronographed loads in my 22" barrelled A1 using 160gn Accubonds and 60gn of Rel 22 which is a half grain under the Nosler book Max load. It developed 2940fps which I thought rather useful in my Winchester Featherweight. John
When truth is ignored, it does not change an untruth from remaining a lie.
|
|
|
|
Joined: Nov 2002
Posts: 33,718 Likes: 2
Campfire 'Bwana
|
Campfire 'Bwana
Joined: Nov 2002
Posts: 33,718 Likes: 2 |
Tough to make a RCH worth much, particularly in this case.
Conduct is the best proof of character.
|
|
|
|
597 members (1beaver_shooter, 06hunter59, 1_deuce, 160user, 1234, 12344mag, 60 invisible),
2,274
guests, and
1,318
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
Forums81
Topics1,192,136
Posts18,483,966
Members73,966
|
Most Online11,491 Jul 7th, 2023
|
|
|
|