I bought this used stock about 1 year back thinking it may fit a 1899 in .303, as it was advertized on ebay as fitting 99 or 1899. Someone had indicated such in Pencil on the butt. It did not fit my 1899. I suspect it was made for a 99A. Dimensions as follows: 16 inches total length, top tang opening 3& 1/16 inches, bottom tang opening 5 inches, and will accept a 5& 1/4 inch long stock bolt. The stock has a couple of issues and I have taken pics. There is NO tang crack. But there is a chip from toe, and slight sanding marks near butt edge. Thanks. I would like to recover most of my cost if possible. How about $55 shipped?