I am giving serious thought to getting a Kimber Montana 280AI I am curious as to how much velocity would be lost by shooting standard 280 ammo out of the 280AI Chamber and if there is any accuracy loss in doing so ?
Not sure about velocity loss. Maybe 100fps? As to accuracy, it can be just as good as your worked up AI loads.
"Civilized men are more discourteous than savages because they know they can be impolite without having their skulls split, as a general thing." Robert E. Howard
cant speak about velocity loss,as I had no way to test it,but as for accuracy,I found a load that would give excellent accuracy when fire forming 6mm to 244AI. interestingly,full power loads would usually split the neck,lower power wouldn't fill out the shoulder completely. just right ,though,and I get fully formed brass,and sub moa shooting,at around 3000 fps,with 85 gr bullets.
********************** [the member formerly known as fluffy}
I've shot a 280AI for close to thirty years. During that time I've fireformed many factory loads. Generally I have not had much velocity loss from a standard 280 baseline velocity. One thing stands out though: factory loads being blown out have given me some of the most ungodly groups my AI's ever fired...bunch of little bitty bug holes! I don't know why, but it happens....I would hate to know my AI's prefer low velocity loads......dear God.
You only live once, but...if you do it right, once is enough.
I have been shooting my Kimber 280AI with both AI and standard loads and I can attest to what has been already said. Some of the standard 280 loads have been very accurate in my rifle. Then I have the advantage of both an accurate load and a newly fire formed case.
In a couple of AI's fire forming loads often give exceptional accuracy.
The collection of taxes which are not absolutely required, which do not beyond reasonable doubt contribute to public welfare, is only a species of legalized larceny. Under this Republic the rewards of industry belong to those who earn them. Coolidge
The FF load Dober gave me for the 7mm Masburn does 3150 with a 139 Hornady,and in my rifle I can hunt with it just as it's set up. No re zero needed. It shoots very well also.
My experience is basically the same as everybody else's. There's always some velocity loss when shooting standard ammo in an improved chamber, but exactly how much depends on the powder, bullet, etc. I've owned rifles for several "improved" cartridges, but can't recall a loss of more than 100 fps.
Accuracy is usually good with fire-forming loads, but how good again depends on the load. If the bullets are seated crooked in fireforming loads, then they probably won't group very well, but if the loads are put together correctly then accuracy can be outstanding. My fire-forming loads in several rifles have been accurate enough to shoot ground squirrels and prairie dogs at 200-300 yards.
“Montana seems to me to be what a small boy would think Texas is like from hearing Texans.” John Steinbeck
My 280, 22-250 and 257 ack groups forming loads almost as good as the formed loads. The last cases i formed for the 280 i used Unique and cream of wheat, but never took the time to group the cream a wheat on paper so can't say about that load.
A Doe walks out of the woods today and says, that is the last time I'm going to do that for Two Bucks.
This is a 280 AI fire forming session. 40 rounds as I recall. I didn't worry too much about accuracy and group size, I just wanted the brass. The load was a 280 Rem Max load with a 154 gr Hornady Spire Point, the bullets were given to me.
JD That is about what I got using the same bullet and 280 max loads using IMR 4350. I haven't loaded the 154 Hornady's in the improved case yet as I have too many others and the weather is no cooperating enough to go out yet.
I bought a bunch of 154's a couple of years back for $15 a box in a Mom and Pop store in shotgun country.
When truth is ignored, it does not change an untruth from remaining a lie.