|
|
Joined: Nov 2013
Posts: 205
Campfire Member
|
OP
Campfire Member
Joined: Nov 2013
Posts: 205 |
stockys has the Bell & Carlson on sale right now for 269 in stock and id like to get one for my Tikka T3 in 6.5X55 but.. the reason the tupperware dosent fit me right now is because I'm only 5'-4" and have short arms. so can i remove about an inch of stock myself to bring the LOP down to about 12 5/8 with the limbsaver. Ive never modified the LOP on a synthetic stock. Im afraid if I take off that much ill be into the fill and have nothing to drill into for the pad.
|
|
|
|
Joined: Jul 2001
Posts: 60,149 Likes: 11
Campfire Kahuna
|
Campfire Kahuna
Joined: Jul 2001
Posts: 60,149 Likes: 11 |
You don't have to drill into the pad. Just epoxy it on.
“Montana seems to me to be what a small boy would think Texas is like from hearing Texans.” John Steinbeck
|
|
|
|
Joined: Dec 2007
Posts: 1,523
Campfire Regular
|
Campfire Regular
Joined: Dec 2007
Posts: 1,523 |
I've done this to a couple of Remington tupperware stocks. Cut to the length you need then wittle a 1/4-3/8" thick piece of hard wood so it will slip into the hollow of the butt, just below the cut edge. Rough up the inside surface and epoxy the block of wood in flush or just below. When cured, mark the hole locations through the pad then drill undersize pilot holes. Screw the pad on and you are done. You could also glue the pad on but I feel this little bit of extra work makes for a more secure system.
|
|
|
|
Joined: Nov 2013
Posts: 205
Campfire Member
|
OP
Campfire Member
Joined: Nov 2013
Posts: 205 |
Thx! That's exactly what I'm gonna do.. After I chop it down and make sure I like the length I'm gonna order the McEdge..
|
|
|
|
Joined: Jan 2003
Posts: 8,294
Campfire Outfitter
|
Campfire Outfitter
Joined: Jan 2003
Posts: 8,294 |
Have also foamed stock prior to cutting. Drilled 1/2" holes to center pad screws and epoxied dowel in to hold screws. Quiets stock also.
W
"I would build one again, if it were not for my 350RM (grin)."
MtnHtr
|
|
|
|
517 members (17CalFan, 1lesfox, 1234, 007FJ, 01Foreman400, 160user, 51 invisible),
2,364
guests, and
1,228
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
Forums81
Topics1,192,378
Posts18,488,518
Members73,970
|
Most Online11,491 Jul 7th, 2023
|
|
|
|
|