Might find something on Gunbroker Or hit the Pawn shops,thats where I found mine ! Mauser 98 8mmJS double set triggers folding rear sights and Weaver 2.5x scope,sold the scope and put a Leupold 4x long tube on it. It will do about .75 inch for 3 shots with Partizan 196 grain softs and an inch with my reloads of 47 Grains H-4895 and 150 grain Sierras !
Look for a "guild" or "cigarette" rifle be aware of the chambering. Also scope mounts, claw mounts especially. If the scope mounts are not there or are for a special size/type scope it could be a REAL problem. Be patient they are out there and can be found for a decent price. Most will be military conversions, with the charger clip cut outs. Others could be "FN" style, these will be later models.
I would say that rates a solid, heart-felt, HUBBA-FRIGGIN-HUBBA; she has lines where she ought. Not the best price but sure not the worst. I bet you could get $125 for that Lyman 48 on flEbay? D&T is $50-$75.
Don't hate me, but this just came back to me for about half the opening bid on that:
It has the original military safety & trigger so I am having the same safety installed as is on the gunbroker Mauser you cite ($130-ish installed), and can't decide on a trigger. The barrel is 24" and I'm thinking 21" is just right. I had it D&T'd & the charger hump ground, have Talley bases & rings on the way for a VX2 2-7x33mm w/ LRD.
Also picked up some wax I'm gonna use to fill in the pores & buff out tomorrow.
I really love these classic sporters and cast a pretty wide net. A client of mine trades uber high end knives and saw this at a show and knew it had my name on it.
Nice looking rifle at a great price. I would be proud to own it.
Skeleton butt plate looks like it is a little blurry, but will probably be ok if seen in person. The stock has some drop in it, but I would keep the iron sights, so, to me, that is a good thing. It looks like a good clean rifle from what I can see. It would already be sold if I wasn't faced with some large Veterinarian bills and needing new lawn mower.
Looks good. You could wait a good bit to find a better one at that price.
It's likely that there are a few lurkers waiting to pounce on it. If I wanted it, I'd just pay the Buy Now price and skip the suspence. Even if there were invisible issues, you're getting in low enough to deal with them and still be okay.
On the other hand, you can always keep looking if you enjoy the "chase".
Nice looking rifle at a great price. I would be proud to own it.
Skeleton butt plate looks like it is a little blurry, but will probably be ok if seen in person. The stock has some drop in it, but I would keep the iron sights, so, to me, that is a good thing. It looks like a good clean rifle from what I can see. It would already be sold if I wasn't faced with some large Veterinarian bills and needing new lawn mower.
Pay the Vet, damn the lawn mower, buy the gun.
g
"I have sworn upon the altar of God, eternal hostility against every form of tyranny over the mind of man." Thomas Jefferson
Nice looking rifle at a great price. I would be proud to own it.
Skeleton butt plate looks like it is a little blurry, but will probably be ok if seen in person. The stock has some drop in it, but I would keep the iron sights, so, to me, that is a good thing. It looks like a good clean rifle from what I can see. It would already be sold if I wasn't faced with some large Veterinarian bills and needing new lawn mower.
Pay the Vet, damn the lawn mower, buy the gun.
g
GeoW, you don't know how close I've come… several times. I've had it on my watch list. I think it would be very difficult to duplicate at anything near the buy it now price unless you could do a lot of the work yourself and don't value your time . I've got a small ring Husqvarna that is destined to become a 7mm Mauser very similar to this one. It is going to be my "grail rifle" with a killer piece of fiddleback walnut in the classic style. If I didn't enjoy the planning and anticipation part of the build, I would have already bought this 7mm. The original poster would have had to of been really quick to have a chance at it.
With only $200 between the Buy Now price and the starting bid, it couldn't last long, especially since the Buy Now price was a good deal.
My bidding strategy is to just bid what I'm willing to pay and wait it out. If there's a Buy Now price that's a good deal, I just pay it. Dinking around to save a couple of bucks has cost me a few good ones.
My bidding strategy is to just bid what I'm willing to pay and wait it out. If there's a Buy Now price that's a good deal, I just pay it. Dinking around to save a couple of bucks has cost me a few good ones.
I could have written that my self.
Looks to me like somebody got a nice Mauser at a good price.
My bidding strategy is to just bid what I'm willing to pay and wait it out. If there's a Buy Now price that's a good deal, I just pay it. Dinking around to save a couple of bucks has cost me a few good ones.
I could have written that my self.
Looks to me like somebody got a nice Mauser at a good price.
I agree with both of you. Some folks apparently enjoy the "chase" more than I do. That's fine for them.
I gifted youngest son this old beast I had in the safe. Neat old piece but like most of the stuff in the safes I don't get to use them as much as I would like. This one dated 12/23. 8 x 57 JS. DST's. Great shooter! Told him he HAD to shoot a deer or hog with it.
Founder Ancient Order of the 1895 Winchester
"Come, shall we go and kill us venison? And yet it irks me the poor dappled fools, Being native burghers of this desert city, Should in their own confines with forked heads Have their round haunches gored."
LOL! Hell I couldnt afford feeding our old brood! No, he and his brother have helped a bunch since their mothers two strokes back in January. Least I could do! Gave his older brother a #1mkIII SMLE. It's what he wanted. They will appreciate them!
Founder Ancient Order of the 1895 Winchester
"Come, shall we go and kill us venison? And yet it irks me the poor dappled fools, Being native burghers of this desert city, Should in their own confines with forked heads Have their round haunches gored."
Good idea to give them something while you're still around to see them enjoy it. It also will help simplify things when you take that final "Big Step".
My sons told me that every time I sell or trade something, I'm messing up the "split" they've devised.
So the "split" plan is evidently a universal thing????
Founder Ancient Order of the 1895 Winchester
"Come, shall we go and kill us venison? And yet it irks me the poor dappled fools, Being native burghers of this desert city, Should in their own confines with forked heads Have their round haunches gored."
I am clean out of Model 8's. All I got left is a beater 81.
But they sure are giving my other Mausers and Krags a close eye!!
Founder Ancient Order of the 1895 Winchester
"Come, shall we go and kill us venison? And yet it irks me the poor dappled fools, Being native burghers of this desert city, Should in their own confines with forked heads Have their round haunches gored."
"Come, shall we go and kill us venison? And yet it irks me the poor dappled fools, Being native burghers of this desert city, Should in their own confines with forked heads Have their round haunches gored."
I think it is much better to give gifts with a warm hand than with a cold hand. You get to see the pleasure the recipient receives. Good for you, Kaywoodie.
Nice line, WoodsyAl. I might have to steal that one.
Have at it! I do believe in the sentiment expressed. When we reach a certain age, and are not going to use some of our things, why not pass them on to someone we love who will use and cherish them while we are still alive?
Al. I agree 100%. I like seeing the "your sh**ing me!" Look on their face when I do it!!! Sorry to sound so crude, but that's my best description. Due to her health situation, Wifey has given some of her stuff away. Can't wait to see look on one of the grandson's face when he gets a nice Savage 99F for Christmas this year!!!
Founder Ancient Order of the 1895 Winchester
"Come, shall we go and kill us venison? And yet it irks me the poor dappled fools, Being native burghers of this desert city, Should in their own confines with forked heads Have their round haunches gored."
Are you still looking? Any specific caliber or features? I have a nice 50's FN with a factory receiver sight in 06 and a 98 with claw mounts and scope in 8mm.
Good Luck Blairvt!!!! I hope they are what you are looking for. Life's too short to do without a real nice Mauser!!!
Founder Ancient Order of the 1895 Winchester
"Come, shall we go and kill us venison? And yet it irks me the poor dappled fools, Being native burghers of this desert city, Should in their own confines with forked heads Have their round haunches gored."
Not as special as I'd like for close to a grand. Seems like you like open sights more than I do for a custom Mauser, so our tastes are a bit different.
That being said, just doing a search for custom mausers on gunbroker turned up a few options:
open sights are optional for me. I hate side mount scopes. I'm still kicking myself for not getting the first one I posted. A few dollars doesn't matter now.
I just went to Cabelas and got a old S&W marked Husqvarna with a VX-II 4-12 AO. $525 with Military discount. It was marked I-bolt. I'm thinking they don't know what it was.
I don't want to steal blairvt's thunder but I have a similar request as his.
My 15-year old son wants an authentic German K-98 that's been sporterized in 8x57. His budget is up to $600ish. The bank of Dad will finance the project for him while he earns money this summer. I have a scope he can "borrow" for the time being. I'll buy the dies, etc. for reloading.
If you have you have or know someone with a Mauser who wants to help a budding hunter, please PM me. I'll also post this in the Classifieds.
If you have a problem with this message, blairvt, I'll delete it.
I just went to Cabelas and got a old S&W marked Husqvarna with a VX-II 4-12 AO. $525 with Military discount. It was marked I-bolt. I'm thinking they don't know what it was.
HVA is best bang for the buck in good handling classic Mauser sporting rifle. Prices for ones with birch stock in common calibers start at about $300 and go up from there.
Check out BRNO model 21s and 22s, some of the coolest old mausers going.
The problem with Czechoslovak Mauser Sporters is that they became too expensive. Pre-war Oberndorf Mausers are also too expensive. There are better values out there for those that know better.
I don't want to steal blairvt's thunder but I have a similar request as his.
My 15-year old son wants an authentic German K-98 that's been sporterized in 8x57. His budget is up to $600ish. The bank of Dad will finance the project for him while he earns money this summer. I have a scope he can "borrow" for the time being. I'll buy the dies, etc. for reloading.
If you have you have or know someone with a Mauser who wants to help a budding hunter, please PM me. I'll also post this in the Classifieds.
If you have a problem with this message, blairvt, I'll delete it.
I don't want to steal blairvt's thunder but I have a similar request as his.
My 15-year old son wants an authentic German K-98 that's been sporterized in 8x57. His budget is up to $600ish. The bank of Dad will finance the project for him while he earns money this summer. I have a scope he can "borrow" for the time being. I'll buy the dies, etc. for reloading.
If you have you have or know someone with a Mauser who wants to help a budding hunter, please PM me. I'll also post this in the Classifieds.
If you have a problem with this message, blairvt, I'll delete it.
Thanks
Bryan
Could you talk him into this?
You couldn't have picked an uglier example?
Front scope base holes are too far back. Plugged holes on left side of receiver, stock has multiple cracks.
True that the 640's are a great value, just not that one.
Bryan,
If you are into the 640 idea, I have a nicer unmolested example.
I went to a local gun shop and they had a Mauser banner standard modell 22-250. Has double set triggers. I meant to take pictures before I took at apart but didn't. I'm stripping the stock and refinishing. I was surprised that the triggers came out with the floor plate. Am I going to have problems putting it back together? Price, $350! I think the action would be worth more than that. Anyone know about a Mauser banner standard modell?
Yes, typically the action alone is worth more than what you paid. If the triggers work and are complete, then that only adds to the worth. It is normal for the riggers to be pinned and or screwed to the bottom metal. Reassembly is easy, just put it back the way you took it out.
Std Modell is a commercial marked K98 for all intents and purposes. A high quality action.
No rust and triggers function perfectly. Pretty piece of checkered walnut that just needs to be freshened up. Bluing isn't real strong, just used looking. I'll see how it shoots, if I don't like it I could see it becoming a 338-06. This one is drilled and has a old redfield base. Did they come d&t'd?
I am working on a Mauser project for myself. I have the PAWS bottom metal already. (Don't say anything. Price was right.) New receiver.
I have been thinking about going retro, and putting a Williams one piece base on it. I wonder if they still have the "Ace-in the Hole" peep sight available? Making a 375 Scovill. I'd use a banded ramp, and maybe a barrel band front swivel. Always wanted to do this when I was a kid in the early 60's. I'd get a classic blank from Boyds, and start removing wood.
When your doing your own work in the basement for fun...have fun.
They have a lot of really nice rifles on here. I recently bought a Paul Jaeger rifle built on a FN Mauser action in 7mm Mag from them. Morris hallowell is great to deal with also and their photography is top notch.