I'm constantly finding out how sharp the top of an RCBS seater die can be on my bare arm when reaching over the top of the press for bullets and such on the shelf above. Those threaded shafts poking up from the dies leave a nice furrow in the forearm.
I take a 9mm lead round nose bullet, drill a hole in the base, and screw it on the shafts.
I shot my thumb with a nail gun about 20 years ago. I recommend that for everyone.
I shot through my forefinger into the middle one...I don't recommend it.....
My most painful reloading experience happened when I was polishing the inside of some case necks with steel wool wrapped around a brass brush. I rest the 3/8ths Dewalt on my thigh, and when pushing the case on, I had bent the brush just as the drill hit 900 RPM, and flung the case going Mach I directly into my left nut.
Reloading was temporarily suspended.......
