After a little sanding the knife is ready for a dip in ferris chloride. I clean the blade with acetone and then alcohol to remove any residue that will affect the etch.
![[Linked Image]](https://uploads.tapatalk-cdn.com/20170320/032bf781d581b84cd59a1584507e9cf9.jpg)
![[Linked Image]](https://uploads.tapatalk-cdn.com/20170320/31c77d437173ad4754f6b2f25a6f6c83.jpg)
After a few minutes, spray the blade with windex to stop the chemical reaction and wipe off the excess with steel will... Nice and subtle.
![[Linked Image]](https://uploads.tapatalk-cdn.com/20170320/11cecc9fef3d924aad26135e6abba518.jpg)
