[quote=Dillonbuck]Been using a Rem 660 in 308 since the early nineties. It will take a no go plus several thousandth headspace gauge. Neck sized LC brass until it got snug, then adjust full length size die to bump shoulder. The thing also likes pretty warm loads, on!y ever had one problem with brass,that was what caused the headspace check in the first place. And no, my loads did not cause the problem, it was that way when I bought it.[/quorete]
Something similar is what I was referring to in my earlier post, I have used a lot of "new" take-off barrels and quite often they would be close on headspace but "just out", so I sized the brass to fit the chamber.
drover
