New wood sometimes fits real tight. It may require some inletting on your part. Typically, the trigger group crushes down the wood and makes for a real tight fit. This is good if you want an accurate M1. Just make sure the receiver is set into the stock as far as possible before you try to inlet. Take a rubber mallet and tap on the back of the action to make sure the receiver is fully seated.
I said TAP not smack. Serious Garand shooters are envious of your tight fitting stock.
kwg
For liberals and anarchists, power and control is opium, selling envy is the fastest and easiest way to get it. TRR. American conservative. Never trust a white liberal. Malcom X Current NRA member.
| 
