Hi
Im having a go at rebarrelling my rem 700, got the barrel set up through the headstock with spider each end
Using a bald eagle reamer holder and hss finish reamer with interchangeable pilot in 30-06
Using a flushing set up running the normal cutting oil but it is a little low on pressure so ive been backing out every 60-80 thou to let the chips clear
Running at 180 rpm
Have developed a bit of reamer chatter with about 1/2” left to cut, tried feeding the reamer in faster to cut through it but the chatter has remained
Does anyone have any advice ? Any help would be much appreciated. Should I try faster rpm Or maybe slower?
Thanks
B
