How are you applying the POR15 and how did you prep the frame?
I bought the sample kit that comes with the POR15 1 container of degreaser and metal prep. I wire wheeled and hand brushed off as much loose rust as I could, sprayed on the degreaser ,waited 15 minutes and hosed it off and then let it dry. I then used the metal prep on it and repeated the same procedure. It took about 2 hours to completely dry out and then I painted on the POR. It took the POR about 2 hours to setup , dry to the touch but I might have lathered on a lot.
I thought it would be a PITA but actually not bad at all. In the instructions they call for using it with 50% humidity or less. I think we were at that or maybe a little less today. I am going to buy another quart which should finish it and more metal prep and degreaser.
