Originally Posted by Cheyenne
Originally Posted by gunner500
I may look at 85-90gr FMJ-flat points with the little 380, just try to punch holes and break bones, iirc Buffalo Bore loads a little hard cast load for the 380, that might work too if the pistol would run it.


I started a thread on the Buffalo Bore hard cast on April 10 of this year. I also am preparing to start threads on some follow-up with that load and with Lehigh Xtreme Penetrators in .380.


For any of you guys who cast your own, the little Lee 95 RF bullet is a good choice for a hard cast flat nose. I use it in 9mm with very mild loads that are just a little above .380 power and it's a great little bullet for that application, and very accurate.