Dispite all the advice to not do it myself...I removed the stock and saw how it worked and was very confident I could do it.
After gently forcing the sear to its lowest position and the other contact part to its highest postion I measured the contact suface and it was 3/16". I reduced that to 1/16", polished up the parts and now it feels pretty good.
I placed a spent cartridge in the chamber and banged and knocked the rifle around and it didn't go off. I will try this again with a little more "controlled" abuse to make sure it will not go off accidentally.
If it didnt look so easy I wouldn't have attempted it myself but it was just that easy.
Thanks,
Tarzan
