Ok folks got one stumping me today. Savage 110 30-06 does not like 150gr bullets 3-4 inch group at 100 yards, 165 grain bullets shoot and inch group so I’m loading Nosler partitions 165 grains over 47.5 grains of H4895 CCI 250 large rifle Magnum primer give Constant groups under 1 inch at 100 yards but move it out to 175 yards and it then shoots a 3-4 inch group 8 inches low and 6 inches right. Does the rifle just not like the bullet or do I need to play with seating depth I don’t understand I was guessing it would shoot around an inch low not 8.
Show a pic of the rifle. What kind of scope mounts and scope are you using? Is everything loctited down and torqued properly? Is the barrel nut tight? I've never had an ill shooting 30-06... Also, go back to the basics and use one of the 4350's. I don't care which, just use/try one...
