Originally Posted by Redneck
Originally Posted by Spotshooter
Check the follower to see if it’s hanging up on the nose and if so pull it apart and polish up / smooth up that area to see why it’s binding.

That. But also check the tension on the magazine spring - specifically in the forward position of the follower.. I've seen many Rem magazine springs with very little forward tension - and that will cause your issue at times..



^^^^^^^^^^^^^^^^


THIS


And for the layperson ( meaning me....) just looking at and comparing them with other springs doesn't work. I've had this issue twice, replaced the spring and presto! fix it. I personally could see no difference...but...

"...the left considers you vermin, and they'll kill you given the chance..." Bristoe