I have a 6.5x47Lapua that isn't feeding correctly using ADL bottom metal . First round [of 3] slides up feed ramp - then gets wedged - bullet tip too high , spring and/or follower wants to tilt down front of follower . Second round same/same - I can back off forward pressure and jigglewiggle the round into the chamber . Last round tilts follower so steep the bolt won't pass the butt of the follower because it's nosediving front .
Mag box/spring/follower/hardware all new from Brownells .
Took bottom metal out of my 243 adl that works perfect - swapped everything - stock/all bottom metal , 6.5L does same exact thing with both sets of bottom metal .
Any ideas why this is happening ?
