Does anyone have any experience with the Wilson EDC X9? I really like the looks of the gun and read good things about it in the gun rags. I have never been a big fan of the 9mm but figure I will give it another shot. I have tried a few of the smaller autos in 9mm but they were never comfortable with my big hands. I figure if I am going to get a 9mm I should try a good one.
Pacecars---I've had one for over a year and a half----it is my favorite handgun by far! I've shot two Gunsite courses, one Steve Hendricks class, one Dave Spaulding class, the GAS match and one Thunder Ranch class with it (each class pushing 1000 rounds +/- and have shot it alot for practice-I'm guessing probably 6000+ rounds)-----it is a remarkable handgun. The feed ramp is almost parallel to the top round in the magazine--feeding has not been a problem---I actually loaded a few magazines once while talking with someone and inadvertently loaded a cartridge BACKWARDS in the magazine---the gun fed the cartridge!!! Of course it would not go all the way in, but I had to get a dowl-rod to knock it out!! The only other failure to feed was during a long speed-loading drill at Gunsite---we were dropping our mags in the gritty sand that they have for a range deck---after about 30 iterations, I had the magazine follower stick and not feed a round just because there was so much grit in the mag. Knocked it out, blew the dust off and it worked fine! At Thunder Ranch a few weeks ago I was using a new manufacture of lead-free frangible and had a few light primer strikes, but have NEVER had that happen with any mixture of ball ammo. For 6000+ rounds, one backward-cartridge failure, one dirty magazine follower and a few light primer strikes due to the ammo ain't a bad record.
It is a little light for a range gun---therefore I've ordered a 5" EDC which has a standard barrel busing and is a little heavier---it should be here in a week or so as they told me build-to-delivery would be about 8 weeks. Bill is coming out with the EDC in a Sub-Compact version which is due to be released around the SHOT show (Jan.)--he's sending me one for T&E for an article for American Handgunner----I got to see and handle a prototype at Bill's ranch in Texas a little over a month ago and it looks fine.
The gun has a Browning High Power/CZ75 feel but with a WONDERFUL trigger---mine's about 3 pounds and crisp. I can't say enough about this handgun--I encourage you to get one. It's the least expensive handgun that Wilson makes, I think. I'm pretty sure that you'll be delighted with it. Their customer service is second-to-none, at least it has been for me.
Feel free to message me if you want to talk.
Greg
