I used the 200 gr Remington in SP and FP. Don't remember the load. I know I used CCI match primers and Lake City brass match prepped and then one time through the 358 Winchester die. When you resize to a larger caliber it generally shrinks the length and to a smaller bore size they need trimming to length. The powder was 4064 until I ran out, then Varget. Both were middle of the book used for my personal max. I used the start load and worked up to the middle. I never had any tracking to do after shooting a whitetail. Usually made at most ten yards. Lots of bullets to try. I have a collection of good bullets and want to try the 180 TTSX next. But then there is the three box collection of 275 gr Hornady, Some 225 gr Accubonds, 280 gr WFN and on.... Good luck and Be Well, Rustyzipper.
