Originally Posted by baldhunter
Should hear back just any day.Sent pictures after I emailed them.This was what I got before I sent pictures

Note that the barrel is hammer forged then hydraulically lapped so some imperfections are normal inside the bore. However they are neither drilled nor cut, so no tool marks other than from the metal of the barrel being hammered into the mandrel should be present from the factory.
You can send the pictures to this email and we can inspect them here to see if they are out of the ordinary.

I'd say this is out of the ordinary


Hydraulically lapped? I guess it is possible and if so the machine went haywire.