The specs. On your reamer are quite a bit different than mine.
Mine has a case length of 1.893” and a trim of 1.883”. Trimmed all to 1.890” after fire forming +1. Have never trimmed again in several rifles.
Probably will never do another 1-12” or 1-14” twist again the 1-8” twist with 80gr VLD’s is my happy spot.
I have run into one unexpected problem though, I had my reamer made before Lapua made 22-250 brass, Lapua is larger at the base than any other brand so after 5-6 firings they get sticky where a die won’t size so I had to switch back to Norma brass that the reamer was made for
