Brownells says its the correct part but it is not so I am retuning it. Also this bolt head does not have rivet holes so it does not use the one suggested above.
Who in this group can or knows who can install a Sako or the AR-15 type extractor at a reasonable price?
What Dan is suggesting is to drill a hole for the riveted type. Don't know how much different the bolt nose relief for the riveted type is but I would bet Dan could do it!
Not as easy to just drill a hole for the rivet, you also have to do a counter sink for the rivet to fit inside the bolt nose, as the rivet has a cone so the rivet can fit inside and fit flush. I have done it but wont anymore.
