Home Forums Reloading Reloading Software The Redding t7 turret press are you on the train

I've been using Reddding T7 press for five years now I'm trying to get the picture of it to come up. I started with a Lyman JR for 357mag then went to a RCBS rockchunker JR3, then to a Lyman All American turret then tried Lee progessive that failed then in2015 I purchased my T7 and wont look back,( I still use the RCBS for sizing and depriming) I bought the T7 with an extra turent head so one head is setup for Pistols and the other for rifles. The rifle turrent has a Lyman 55 powder measure and two die for each caliber 308 Win, 30-06, and 35REM. The pistol turrent is setup with a redding pistol powder measure and two dies for each caliber 357mag, 38super, and 30luger. my next investment is lock and load die adapters for the rock cucker I just bought so I can switch easily from one caliber to the other without needing to adjust the dies. The other rock chucker I put an adapter on to swag military primer crimps.The All American turret I sold to a friend that I'm teaching to reload. I just reloaded a hundred rounds of 30-30 for him with that press, took five out to test he grouped in a 1 inch (as you notice I don't have a 30-30). This press should be good for him as it has four spots for dies which are set up for one deprimer sizer, one powder measure, one seater and factory crimp.
This is the press that sold me on turent presses.