Originally Posted by RickyD


How many get the "Hi*Tek" coated vs the lubed?



I tried HiTek coated in 40sw. I pushed .401" 155gr LSWC to 1000fps (slow to me) and 1370fps (fast to me), 4" barrel, Longshot. Mediocre results. No leading just past the chamber, but leading in the last inch of barrel. And they still smoke a bit (kindof stinky), but not as much as regular lubed fodder.

I also tried .402" 180gr LSWC Hi Tek coated from Brazos bullets. Ran them at 1000fps and 1150fps (4" barrel, Longshot). Better results, but they still lead in the last inch of barrel. Still smoke more than I'd like.

I still want to try MBC's 44mag 300gr Hi Tek coated WFN.

Conclusion: I have only one 40sw right now - need to try another to rule out a bad barrel. Otherwise the Hi Tek coating is ok and less fuss than wax-lubed lead. I don't shoot enough anymore to be concerned about the cost increase.

Leading as viewed from chamber:

[Linked Image from sites.google.com]

Last edited by dla; 06/14/20.
Castor Oil Case Lube
Lee Auto Bench Prime