Originally Posted by 805
Originally Posted by 117LBS
Originally Posted by gemby58
That should work, I like milling up to the lug, but that shouldn't be causing you any problem. Your weak ejection in caused by the ejector and spring


Thanks for the feedback.

Any recommendations on a spring? Is it the same as a 700? Should I just replace the spring or the spring and plunger?


The spring is the same for a 700/721/722. I would make sure the plunger doesn’t have any rough spots or edges that hang up. Also clean all the brass shaving from the recess and install a new spring.



Spray some carburetor cleaner in the hole let soak and blow it out with a air hose. Like said above 700 spring will work.