Since you have a custom built on a 700, you may run into a problem. I have never used Norma brass for that but I have used Lapua brass. Lapua is made for a Mauser with a claw extractor, it is a narrow groove, and the head diameter is a bit bigger than the usual .473". Many have no issues with Lapua brass in a Remington, but some do. Most all of the American made brass companies make the Swede with a .473" head. I use Lapua but I turn the brass to fit. I have Winchester, Remington and Nosler brass too.
In a well chambered modern action, the Swede really shines!
Last edited by WayneShaw; 07/09/20.
